Archive for the 'Gunpla' Category

1/100 Akohobby RGM-79L GM Light Armor Conversion

Kit Info
Manufacturer: Akohobby
Scale: 1/100
Media: Resin
Parts: 49 + 30 Metal parts
Price: USD49.00

The Subject
The RGM-79L GM Light Armor was developed for hit-and-run raids and serves as a fast attack unit for the Federation Forces. It mounts the minimum amount of armor giving it better acceleration and maneuverability. Most notable about this variant is the lack of armor on the shoulders and ankles.

The GM Light Armor carries a beam gun that’s similar to the RX-78-2 Gundam. It is more powerful than the GM’s standard beam spray gun but holds less shots. Many former pilots turned mobile suit pilots favor the GM Light Armor due to its similarity with fighter aircraft.

Continue reading »

1/100 Akohobby RMS-154 Refined Barzam Conversion

Kit Info
Manufacturer: Akohobby
Scale: 1/100
Media: Injection
Parts: 60
Price: USD16.50

The Subject
The RMS-154 Barzam is a mass production mobile suit based on the RX-178 Gundam Mk. II. It was introduced in UC 0088 but was not a successful design and was only produced in limited numbers.

The Refined Barzam is a variant of the RMS-154 which appears as a bridge between the Barzam and the Gundam Mk. II. It is armed with the weapons from the Gundam Mk. II, with the exception of the addition of a grenade launcher for the beam rifle. It also mounts the Gundam Mk. II’s backpack and shield.

Continue reading »

1/100 RGM-79SC GM Sniper Custom Conversion

Kit Info
Manufacturer: Akohobby
Scale: 1/100
Media: Plastic Injection
Parts: 44
Price: SGD22.90

The Subject
The RGM-79SC GM Sniper Custom was developed for the ace pilots of the Federation. Performance and capability was upgraded from the standard GM to the levels of the RX-78-2 Gundam operating out of the White Base during the One Year War.

Generator output was increased for the added load the long-range beam sniper rifle produced. The beam saber was repositioned to the forearm for close combat. Additional racks were added for optional weapons and to increase the mobility, the GM Sniper Custom was upgraded with a mass of additional thrusters and verniers. Less than 50 Sniper Customs were built. Each was specifically tailored for its pilot so no two were configured the same way.

Continue reading »

1/144 B-Club RX-77-3 Guncannon Heavyarms Conversion

Kit Info
Manufacturer: B-Club
Scale: 1/144
Media: Resin
Parts: 72
Price: ¥7,600

The Subject
The RX-77-3 Guncannn Heavyarms is a heavily modified RX-77-2 Guncannon developed as an outgrowth of the RGC-80 GM Cannon design. The Guncannon Heavyarms is designed as a stand-alone combat unit, unlike the GM Cannon.

Basically a retooled Guncannon, the Heavyarms featured better armor, improved 240mm cannons and a grenade rack. By UC 0085, this successful variant would see limited mass production.

Continue reading »

1/144 Bandai HG GAT-X105 Aile Strike Gundam

Kit Info
Manufacturer: Bandai
Scale: 1/144 HG
Media: Injection
Parts: 96 + 27 Polycaps
Price: S$21.00 (est. US$12.00)

The Subject
The GAT-X105 Strike Gundam was one of five experimental Mobile Suits developed by the OMNI Alliance to counter the mobile suits deployed by the ZAFT faction. It is the most versatile among the five units as it was given the ‘flexibility’ to be upgraded with weapons packs : Aile, Launcher and Sword. The Aile (‘Air’ in French) pack adds additional mobility in space to the Strike Gundam as well as flight capabilities on Earth. Weapons-wise, however, the Aile only adds two beam sabers to the Strike’s standard equipment list.

Continue reading »

1/144 Bandai HGUC RGM-79D Cold Climate GM

Kit Info
Manufacturer: Bandai
Scale: 1/144 HGUC
Media: Injection
Parts: 92
Price: S$12.00 (est. US$7.00)

The Subject
The introduction of the MS-09 Dom by the Zeon forces proved to the Federation that while the RGM-79 GM was a capable MS, it needed to field a more maneuverable and better-performing MS to match up with the Dom. Late in the War, the RGM-79D was introduced. The RGM-79D has increased power and maneuverability and is modified for extreme weather conditions with a specialization on cold climate.

Continue reading »

1/100 Akohobby PGM-79 Powered GM Conversion

Kit Info
Manufacturer: Bandai
Scale: 1/100
Media: Injection
Parts: 92
Price: S$25.00 (est. US$15.00)

The Subject
The Powered GM variant of the RGM-79C was developed by the Federation as a testbed for an enhanced backpack that provided very powerful thrust and acceleration. To compliment this enhancement, the legs were mounted with improved shocked absorbers. Because of this, the Powered GM looks more heavily armored externally, which wasn’t the case since the bulkiness was mainly due to the mounting of the backpack control systems and further improvements to the structure of the RGM-79C. At least 3 units were tested with this modification in the Torrington base facility in Australia in UC 0083.

Continue reading »