Completed : Tamiya 1/72 Lockheed Martin F-16CM Fighting Falcon
Kit Info Brand: Tamiya 60788 Scale: 1/72 Media: Injection Markings: Kit The Subject The Lockheed Martin (originally General Dynamics) F-16 Fighting Falcon is a multirole jet fighter. It currently serves in no less than 25 nations, with over 4,400 aircraft built. Commonly known as the ‘Viper’, it features innovations including a...
WIP : Tamiya 1/72 F-16CM Fighting Falcon Pt.4 – Finishing
While waiting for the gloss coat to cure, I decided to tackle the exhaust. After a base of black and painting the inside white, the outside is painted with Vallejo Model Color Pale Burnt Metal. I then masked off the exhaust petals with both 1mm masking tape and liquid mask. Yes each individual petal. The …...
WIP : Hasegawa 1/72 F-14A+ Kai Tomcat Pt. 1 – Cockpit
I’ve always wanted to build the F-14 that appeared in the Macross Zero OAV. Based on some research it looks like this particular boxing of the 1988 molds has all the necessary parts to depict an almost 100% replica of the F-14A+ Kai. The Tomcat that appears in the anime is officially designated F-14A+ Kai …...
WIP : Tamiya 1/72 F-16CM Fighting Falcon Pt.3 – Painting
After fixing the few gaps, it’s time to put some color on this kit! First, the stealth coat with Tamiya XF-1 Flat Black. Then a marble coating with Tamiya XF-12 IJN Gray. The instruction sheet made a mistake in calling out 3 gray tones for the camouflage. By 2010, this jet only has 2 gray …...
WIP : Tamiya 1/72 F-16CM Fighting Falcon Pt.2 – Construction
Work continues… Disappointingly, Tamiya left some visible ejector pin marks on the gear doors which need to be addressed. Tamiya calls for some blue and silver colored parts inside the gearbay. Not sure how accurate this is. The main undercarriage is designed to be installed from the beginning. While troublesome, the upside is a...
WIP : Tamiya 1/72 F-16CM Fighting Falcon Pt.1 – Construction
Next on the factory floor is this Tamiya kit which looks to be as shake and bake as it will ever get. This is the 2nd release where Tamiya added the pylons, underwing stores, armaments and targeting pods. Checking the parts, I realized that by adding 1 component, I can model the F-16CM, an upgraded …...
Completed : Hasegawa 1/48 Lockheed/Mitsubishi F-104J Starfighter
Kit Info Brand: Hasegawa 09385 Scale: 1/48 Media: Injection Markings: TwoBobs 48-051 ‘F-104J Komatsu Starfighters’ The Subject The Lockheed F-104 Starfighter is a single-engine, supersonic interceptor aircraft developed for the USAF, but would serve the air forces of more than a dozen countries. It set many world speed records...
WIP : Hasegawa 1/48 F-104J Starfighter Pt. 6 – Finishing
Once fully cured and wiped down, I sprayed another layer of gloss to prep for a panel wash. This time I decided to do it with Vallejo Dark Grey Model Wash instead of the usual Mig AMMO panel wash. I figured this one will give a subtler effect. I haven’t used it in a while …...
WIP : Hasegawa 1/48 F-104J Starfighter Pt. 5 – Finishing
I begin with a gloss coat. I use AK Interactive’s Intermediate Gauzy, thinned 1:1 with water. There’s a tendency for gloss or flat coats to change the tone of metal paints but I’m glad to say that it works well with metal paints. Markings will be from the TwoBobs ‘F-104J Komatsu Starfighters’ sheet. As usual...
WIP : Hasegawa 1/48 F-104J Starfighter Pt. 4 – Painting
Painting the bare metal finish is next. I’ve had good results from the Vallejo Metal Color line which are acrylics, a more exotic choice than the usual lacquers like Alclad. I begin by masking off the colored areas with masking tape and paper. First on is Metal Color Aluminium. The paint goes on easily when …...
