Tag: Macross

My Builds

Completed : Hasegawa 1/72 Stonewell/Bellcom VR-1D Valkyrie

Kit Info Brand: Hasegawa 65764 Scale: 1/72 Media: Styrene, Resin Markings: From VF-1D 65780 The Subject First introduced in 2008, the VF-1 was developed for the UN Spacy using Overtechnology obtained from the Macross alien spaceship. It would remain as the mainstay fighter throughout what would be called Space War 1. The VF-1 is capable...

Read More

On the Bench

WIP : Hasegawa 1/72 VR-1D Valkyrie Pt.4 – Finishing

Before weathering can begin, I needed to close up the cockpit. So first I installed the ejection seats. The pilots were then cemented into place with CA glue. At this point I noticed that there’s a spot near the port side of fuselage (near the instrument coaming) that didn’t get painted due to my masking. …...

Read More

On the Bench

WIP : Hasegawa 1/72 VR-1D Valkyrie Pt.3 – Painting

Unlike more recent Macross kits, the VF-1 kit has quite a few obvious seamlines that require filling. The joint between the nose and the fuselage in particular required some sanding down and re-scribing. It took awhile but it’s time to put paint to plastic! First on as usual is a basecoat of Tamiya Flat Black. …...

Read More

On the Bench

WIP : Hasegawa 1/72 VR-1D Valkyrie Pt.2 – Construction

Work continues with prepping the pilots. The co-pilot doesn’t fit so his lower legs were chopped off. These were quickly painted up, given a wash, then set aside. With the exhausts pre-painted, it’s time to assemble the legs/engines. The challenge here of course, is to close the gear doors. The kit is designed for lowered...

Read More

My Builds

Completed : Hasegawa 1/72 Grumman F-14A+ Kai Tomcat

Kit Info Brand: Hasegawa 00898 Scale: 1/72 Media: Styrene + PE Markings: No brand third party The Subject The F-14A+ Kai Tomcat was the main fighter used by the UN Navy prior to Space War I. The A+ Kai was a Tomcat with OverTechnology implemented to its avionics to extend its service life. The AIM-120 …...

Read More

On the Bench

• 2 Comments

WIP : Hasegawa 1/72 F-14A+ Kai Tomcat Pt. 7 – Finishing

I prepped the missiles with colors based on their real-life counterparts. In the anime the AIM-120s were all white with 3 blue bands although the AIM-9s looked to be accurate. As per usual, the first coat is a gloss coat using AK Interactive Gauzy. What set this build off was me finding a copy of …...

Read More

On the Bench

WIP : Hasegawa 1/72 VR-1D Valkyrie Pt.1 – Construction

Due to life basically going to shit the last few months, I’ve found myself a bit more time for modeling. So it’s not all bad? Anyway, next up is a slightly modified VF-1 Valkyrie based on the VF-1D. The base kit will be limited edition ‘Virgin Road’ VF-1D that Max piloted during his wedding to …...

Read More

On the Bench

WIP : Hasegawa 1/72 F-14A+ Kai Tomcat Pt. 6 – Painting

The fun begins when I have finished fixing gaps and rescribing the lost details. The amount of gray paint really shows how many areas that needed to be worked on. Before installing the tailfins I addressed the exhaust shrouds. I painted these Vallejo Metal Color Jet Exhaust. I think the results are too light with …...

Read More

On the Bench

WIP : Hasegawa 1/72 F-14A+ Kai Tomcat Pt. 5 – Construction

The final stretch before I can start addressing all the gaps and bad fitting parts. First up is working on the canopy, which has a long mold line going down its middle. 5/6 of this needs to be scraped off with the remaining 1/3 at the back remaining as there’s a canopy detonation cord that …...

Read More

On the Bench

WIP : Hasegawa 1/72 F-14A+ Kai Tomcat Pt. 4 – Construction

Work continues slowly. Before combining the 2 halves of the fuselage together I added the slot for the rod. To ease handling, I added a small length of brass pipe into the fuselage. The rod will then insert into this pipe when I’m ready to mount the kit to the base. A glob of epoxy …...

Read More
Close