Completed : Hasegawa 1/72 Northrom VF-1S Super Strike Valkyrie
Kit Info Brand: Hasegawa Scale: 1/72 Media: Injection Markings: Kit The Subject First introduced in 2008, the VF-1 was developed for the UN Spacy using Overtechnology obtained from the Macross alien spaceship. It would remain as the mainstay fighter throughout what would be called Space War 1. The VF-1 is capable of space flight and...
WIP : Hasegawa 1/72 VF-1S Super Strike Valkyrie Pt.5 – Final Assembly
Time to put everything together! First i attached all the vernier nozzles on the FAST packs. I kept these glossy just like the thrusters. Since I only have 1 clear parts tree I’m stuck with only 1 lens for the beam cannons. I made up a pair of lenses from battery blister pack instead, painted …...
WIP : Hasegawa 1/72 VF-1S Super Strike Valkyrie Pt.4 – Finishing
The fixes required after painting were thankfully minor. The most obvious being the round plate on the backpack. Some careful hand painting fixed it. After a gloss coat, it was time for decals. Since I didn’t have enough of the roundels, I had to use the 2 that were from the old boxing, which is …...
WIP : Hasegawa 1/72 VF-1S Super Strike Valkyrie Pt.3 – Painting
After a few stages of gap filling, I’m ready for painting! I’ll be painting the kit in subassemblies which will make everything easier to handle. Color scheme-wise, I’ll be going for the one below. It’s not Milia’s usual color scheme except for the red highlights. Time for the colors. For the VF-1 first, a...
WIP : Hasegawa 1/72 VF-1S Super Strike Valkyrie Pt.2 – Construction
Work continues for the engines as I assemble the intakes. The closed vents on the intakes were painted and masked off. Like the main gear doors, the nose gear doors also needed to be modified to fit closed. I added small steps inside the bay as stoppers and assembled the 3 bay door parts into …...
WIP : Hasegawa 1/72 VF-1S Super Strike Valkyrie Pt.1 – Construction
I found a semi-built VF-1S Strike Valkyrie in my stash and decided I to finish it. Turns out I’ve made quite a bit of progress with this one. But: workmanship wasn’t great the masking tape has dried out and there was residue stuck to the parts the whole clear sprue is missing Some parts are …...
Completed : Hasegawa 1/72 Shinsei Industry VF-25S Messiah
Kit Info Brand: Hasegawa 65724 Scale: 1/72 Media: Injection Plastic Markings: Kit The Subject The VF-25 Messiah is one of the latest variable fighters used by humans in 2059. It was developed as a replacement for the VF-171, the standard variable fighter in the New UN Spacy. Production prototypes were fielded by SMS in 2059, …...
WIP : Hasegawa 1/72 VF-25S Messiah Pt.3 – Finishing
The kit decals went on OK. Some are robust and took handling and adjusting well but others did tear and some careful re-alignment was needed. I also made a big mistake in putting the SMS logo on the wrong side of the tailfins. I had to carefully re-hydrate them to move them to the correct …...
WIP : Hasegawa 1/72 VF-25S Messiah Pt.2 – Painting
Looks patchy after a few rounds of gray to check for seamlines. But it’s finally ready to paint. First is the base of Tamiya XF-1 Flat Black cut with lacquer thinner. The VF-25S is in a 2 tone gray camo. I used MIG AMMO Light Gray for the lighter gray. I’m guessing because the mecha …...
WIP : Hasegawa 1/72 VF-25S Messiah Pt. 1 – Construction
Building up a Hasegawa Macross kit is easier than a typical aircraft kit in that they can be built up in subassemblies like a mecha kit. However, some planning is needed to make this work out so I begin by cutting and dryfitting the major parts together. As usual with Hasegawa, the fit is very …...
