Completed : Hasegawa 1/72 Northrom VF-1S Super Strike Valkyrie


Kit Info
Brand: Hasegawa
Scale: 1/72
Media: Injection
Markings: Kit

The Subject
First introduced in 2008, the VF-1 was developed for the UN Spacy using Overtechnology obtained from the Macross alien spaceship. It would remain as the mainstay fighter throughout what would be called Space War 1. The VF-1 is capable of space flight and is able to have FAST packs attached to it to increase performance and ordinance.

The VF-1 is designed to be able to transform into a bipedal humanoid ‘Battroid’ mode and a hybrid ‘Gerwalk’ mode where the VF-1 takes on the look of a fighter jet with a pair of arms and legs. In Gerwalk mode, the VF-1 has the additional capability of VTOL operations and is able to skim the surface like a hovercraft. In Battroid mode, the VF-1 is pretty much capable of replicating human movements and most importantly, go into hand-to-hand combat with enemies.

The VF-1S is an uprated variant of the standard VF-1 built by Northrom. It features a modified head with 4 lasers, improved engines and avionics and is assigned to squadron leaders and CAGs.

The VF-1 can be augmented with the Shinnakasu Heavy Industry FAST Pack system with six micro-missiles in two NP-AR-01 micro-missile launcher pods (mounted rearwardly under center ventral section in Fighter mode), and two HMMP-02 micro-missile launcher pods. This configuration is called the Super Valkyrie. The HMMP-02 pod can be replaced by the optional Mauler RO-X2A high-powered double-action beam cannon pod (mounted on dorsal section) which changes the VF-1’s designation to Strike Valkyrie.

The Super Strike Valkyrie* variant is armed with 4 FAST packs (2 overhead, 2 underwing) with 2 HMMP-02 pods and 2 RO-X2A beam cannon pods. It is a further modification of the S-FAST pack / Config ver. 1.1 w variant. It is assigned the first strike role and a secondary space defence role. The mission is to quickly intercept the enemy before they get too close to the fleet.

Info based on the anime series The Super Dimensional Fortress Macross, not Robotech
Info from Wikipedia, the Variable Fighter Master File ‘SDF-1 Macross VF-1 Squadrons’ and Macross Compendium

*The Super Strike Valkyrie is my own variant

The Kit
The base VF-1 kit was first released in 2000. In 2001, the Super and Strike Valkyrie variants were issued. In 2004, Hasegawa released an all-in-1 boxing where you can build either a Super or Strike Valkyrie. Options were also provided for the A/J or S variants.

Revolutionary at the time, the parts were designed to be able to be built in sub-assemblies so you can paint them separately before finally assembling it together. Now that it’s 2019 though, it is showing its age with most of the components broken down to the very basic left and right halves so there are seamlines everywhere.

With that in mind though, the mold is still holding up with a minimal of flash and very finely done panel lines as per Hasegawa’s usual standards. 4 marking options are provided: all of them are for the ‘Macross: Do You Remember Love?’ color schemes. No pilots or missiles are included (you need the weapons set for these). Out of the box, there’s also no gear up option.

The Build
Well, the base kit is the same as the VF-1A I built in 2017 so the same comments apply. I did go with a gear up option so some cutting, trimming and adjusting was required for the gear bay doors to fit properly. The most modifications done were on the Super PACKs which would fit under the wings. The female mounting point needed to be filled up and a slot required for the underwing pylon to fit in. I followed the reference pic of the S-FAST pack / Config ver. 1.1 w and armed my VF-1S with AMM-1 and RMS-1 missiles. First strike role so it needs a lot of missiles to do its job. 🙂

The kit is made up of components from 2 separate boxings. but I replaced those that I didn’t assemble properly with new more carefully done ones. Yes it means I have a ton of spares now which can’t be assembled into another VF-1. Oh well.

I pre-painted quite a lot of parts that I foresee would be hard to reach later on. I should have pre-painted the inside of the FAST packs also but didn’t. These would prove to be hard to reach during the painting stage. Lesson learned.

Colors & Markings
I figured only someone as brave (or reckless) as Milia Jenius would fly this configured VF-1 but I didn’t want to paint the whole kit in her red color. It’s… well… too red. So I decided to go with a white VF-1 with red highlights in a splinter pattern. It took quite a bit of masking but was straightforward enough. For the FAST packs I ended up with a darker color than I originally planned but I think they still work with the main color scheme.

I had 2 sets of decals. 1 is old and yellowed but I needed some of the markings from this sheet for the Super packs. All went well until the last piece which started tearing. I ended up fixing it with some red from unused markings on the new sheet. The shade of red didn’t quite match but you won’t know until you stared at it. It’ll have to do.

The new decals went on without a hitch and as usual, reacted very well with Mark Softer. I gave Milia the nose number of ’03’ figuring Hikaru Ichijyo is ’01′ and Maximilian Jenius is ’02’. Stencils were as usual kept to a minimum.

Finishing
The kit went through my usual stages of weathering of panel wash, fading and filtering but no chipping this time. For the dark FAST packs I panel washed with a medium gray instead of the dark brown I always use. All the clear parts were installed and painted before the components come together.

Final assembly took quite a bit of patience. Some careful planning was required and the components were attached in a specific sequence to reduce the chance of screwing up on my part.

And I’m done! Killing 2 kits in 1 go might be a waste to some, but for me, it’s well worth it to have such a heavily armed variant.

> Part 1: Construction
> Part 2: Construction
> Part 3: Painting
> Part 4: Finishing
> Part 5: Final Assembly

Number 4 of 2019

Leave a Reply

%d bloggers like this: