Written by 2:10 pm On the Bench

WIP : 1/72 Academy F-8E Crusader Pt. 2

Now it’s time to put the two halves of the fuselage together. First up, the myriad parts I needed to assemble before hand. Incidentally, all were sprayed white.

Academy provides a long trunking so you can see into the nose intake. Nice.

From left to right: the MLG bay, the belly flap bay and the arresting hook bay. All are decently detailed for their scale.

I decided to cement them onto one side of the fuselage before putting everything together. It took a bit of adjusting and finesse but the two halves fit pretty much perfectly with no noticeable gaps.

I had to sand down the fuselage so the wing can fit flush. Not an issue if one plans to install the wing pivoted.

Build Log
Part 1 | Part 2 | Part 3 | Part 4 | Part 5 | Part 6

(Visited 18 times, 1 visits today)
Tags: , , , , , , , Last modified: 24 June, 2020
Close
%d bloggers like this: