Written by 1:30 pm On the Bench

WIP : Hasegawa 1/72 VF-22S Sturmvogel II Pt.11

Time to gloss up the kit to prepare for decals! For the top, I sprayed on Krylon Preserve it!. It however didn’t layer on very smoothly. It’s smooth to the touch, but it doesn’t LOOK smooth… strange…

I decided to try using Future Floor Polish for the bottom. Now I’ve never had good experiences airbrushing Future (it spatters when used straight from the bottle) so I’ve relegated it to glossing up clear parts by dipping. However, I’ve read that you can thin it 50/50 with Isopropynol Alcohol. So what now? Using my 0.2 airbrush, it did go on very well. Being quite thin, it also did not pool at all. Nice.

A total of 48 hours was needed for both layers to cure properly before decaling can commence. Hasegawa decals have a reputation of being thick and this one’s no different. Although I have to say the small warning markings are easier to handle because of that.

I had a choice of 3 different noseart. I picked the babe who’s most naked …

Build Log
Part 1 | Part 2 | Part 3 | Part 4 | Part 5 | Part 6 | Part 7 | Part 8
Part 9 | Part 10 | Part 11 | Part 12 | Part 13 | Part 14

(Visited 167 times, 1 visits today)
Tags: , , , , , , Last modified: 24 June, 2020
Close