Written by 4:30 pm On the Bench

WIP : Nitto PKA Gustav Pt. 2 – Painting & Finishing

As is now usual, I start with a base of black.

Next is a white marble coat.

The main color is Panzer Grey with red for the chevrons. These were sprayed slightly thinned so the marble coat shows through.

The decals come from the Wave PKA Konrad kit as the original Nitto ones have yellowed and were unusable.

For weathering, I went with oil paint dots of yellow, blue, white and red.

I randomly dot the whole kit with various colors then blend together with a brush soaked in turpentine.

I also used white to add streaks.

This method ties the 2 contrasting colors together. It also adds subtle variations to the overall paintjob and makes the whole thing look ‘lived in’.

Next I start to ‘beat up’ all the surfaces with various filters, washes, sponge chipping and streaks. The clear parts were also given a wash with white and dust colored oil paints to grime them up.

The base was done with various grades of sand from Woodland Scenics. These were painted with various shades of brown then given brown and dark gray washes. Tufts of grass were added to break up the monotony.

Once attached to the base, I did additional weathering with dust and brown colored pigments.

I gave the kit a half day to cure and misted a flat coat to knock down some of the remaining glossy areas. All done!

Build Log
Pt. 1 – Construction | Pt. 2 – Painting & Finishing

(Visited 483 times, 1 visits today)
Tags: , , , , , , , , , Last modified: 20 February, 2020
Close