WIP : Tamiya 1/72 F-16CM Fighting Falcon Pt.3 – Painting

After fixing the few gaps, it’s time to put some color on this kit!

First, the stealth coat with Tamiya XF-1 Flat Black.

Then a marble coating with Tamiya XF-12 IJN Gray.

The instruction sheet made a mistake in calling out 3 gray tones for the camouflage. By 2010, this jet only has 2 gray tones: FS36118 and FS36270. I went with Mig AMMO Medium Gunship Grey for FS36118. The nose is actually uncolored and change color naturally so any shade of medium gray would have worked and be ‘accurate’. I went with Model Air Aggressor Grey.

I then masked off the nose and the darker gray for the lighter gray color. It’s usually SOP to paint the lighter colors first then go progressively darker. I did it the other way around this time as it will be easier.

For FS36270, I went with Vallejo Mecha Color Medium Grey which after researching matches the FS color.

The bottom is one solid shade of medium gray.

Using the XF-12 as a marble coat gives off a subtler effect than using a pure white color. I also cut the colors with Vallejo Glaze Medium that reduced their opacity.

The weapons were given a base coat of XF-1 Flat Black. I decided to paint the bands instead of relying on decals so I sprayed XF-2 Flat White for them.

I handpainted the bands with Game Color Bloody Red, Model Color Deep Yellow and German Cam Med Brown then masked these off with 0.7mm masking tape and 0.4mm tape for the red band on the AGM-88’s rear section.

The CBU-105s were painted Model Air USA Olive Drab (FS34079) for the body and Mecha Color Medium Grey for the tails. The AIM-120 and AIM-9Xs were painted Mig AMMO Light Compass Ghost Grey (FS36375). Other details lile the fins and seeker heads were handpainted. While it looks white in photos, the AGM-88 is actually a very light shade of FS36622. I thought my bottle of AK Camouflage Grey was too ‘gray’ so I replaced it with Model Air Insignia White instead.

The stores, rails, pylons and ALQ-184 were all the same color as the bottom of the F-16: FS36270 ie. Vallejo Mecha Color Medium Grey. The Sniper pod however is Mig AMMO Medium Gunship Grey (FS36118). Not pictured is the Model Air Insignia White I handpainted the HTS pod’s tip with.

With a deep breath, primary painting is done. Time to finish this thing!

Build Log
Part 1 – Construction | Part 2 – Construction | Part 3 – Painting | Part 4 – Finishing

Leave a Reply

%d bloggers like this: