WIP : Academy 1/48 F-16A ‘TOPGUN 51’ Pt.5 – Construction
It’s been a long WIP but it’s finally the last post for this one. The kit only comes with decals for the console details although it comes with detailed foot pedals. Very odd choice by Academy. There’s no open canopy option although I’ve always intended to keep this one closed anyway so I’ll live with...
WIP : Academy 1/48 F-16A ‘TOPGUN 51’ Pt.4 – Construction
Since I took the time to correct 1 aspect of the kit, I inevitably had to go ahead and try to correct the other more obvious ones. Unlike the Hasegawa kit, the missile rails here are separate but was designed to fit in a strange way with the connecting point being visible. The tab also …...
WIP : Academy 1/48 F-16A ‘TOPGUN 51’ Pt.3- Construction
The Aggressor F-16A usually flies clean without any pylons and stores. The kit comes with the holes for the pylons already open and will need to be filled. First I closed up the holes from the inside with plastic plates. I then inserted sprues that are trimmed to shape into the holes. I then cut …...
WIP : Academy 1/48 F-16A ‘TOPGUN 51’ Pt.2 – Construction
The gearbays on this kit are all bare. This is especially obvious when comparing them to the ones on the Tamiya kit. The intake when fitted leaves a noticeable step on the port side joint. Luckily it’s only a matter of trimming the slight mismold on the lower fuselage. Using both the Tamiya gearbay and …...
WIP : Academy 1/48 F-16A ‘TOPGUN 51’ Pt.1 – Construction
Seeing as how badly I’d done my 414th CTS F-16C and how it has fallen apart, I’ve decided to have another go at an F-16 for this year’s annual Aggressor build. Based on some research, I thought the Academy would be a simplified version of the Hasegawa kit and therefore would be a quick build. …...
Completed : Tamiya 1/72 Lockheed Martin F-16CM Fighting Falcon
Kit Info Brand: Tamiya 60788 Scale: 1/72 Media: Injection Markings: Kit The Subject The Lockheed Martin (originally General Dynamics) F-16 Fighting Falcon is a multirole jet fighter. It currently serves in no less than 25 nations, with over 4,400 aircraft built. Commonly known as the ‘Viper’, it features innovations including a...
WIP : Tamiya 1/72 F-16CM Fighting Falcon Pt.4 – Finishing
While waiting for the gloss coat to cure, I decided to tackle the exhaust. After a base of black and painting the inside white, the outside is painted with Vallejo Model Color Pale Burnt Metal. I then masked off the exhaust petals with both 1mm masking tape and liquid mask. Yes each individual petal. The …...
WIP : Tamiya 1/72 F-16CM Fighting Falcon Pt.3 – Painting
After fixing the few gaps, it’s time to put some color on this kit! First, the stealth coat with Tamiya XF-1 Flat Black. Then a marble coating with Tamiya XF-12 IJN Gray. The instruction sheet made a mistake in calling out 3 gray tones for the camouflage. By 2010, this jet only has 2 gray …...
WIP : Tamiya 1/72 F-16CM Fighting Falcon Pt.2 – Construction
Disappointingly, Tamiya left some visible ejector pin marks on the gear doors which need to be addressed. Tamiya calls for some blue and silver colored parts inside the gearbay. Not sure how accurate this is. The main undercarriage is designed to be installed from the beginning. While troublesome, the upside is a stronger fit. The...
WIP : Tamiya 1/72 F-16CM Fighting Falcon Pt.1 – Construction
Next on the factory floor is this Tamiya kit which looks to be as shake and bake as it will ever get. This is the 2nd release where Tamiya added the pylons, underwing stores, armaments and targeting pods. Checking the parts, I realized that by adding 1 component, I can model the F-16CM, an upgraded …...
