WIP : Hasegawa 1/72 VF-25S Messiah Pt. 1 – Construction
Building up a Hasegawa Macross kit is easier than a typical aircraft kit in that they can be built up in subassemblies like a mecha kit. However, some planning is needed to make this work out so I begin by cutting and dryfitting the major parts together. As usual with Hasegawa, the fit is very …...
Completed : Airfix 1/72 BAE Systems Hawk 109 ‘TNI-AU’
Kit Info Brand: Airfix A03073 Scale: 1/72 Media: Styrene Markings: Scale Nutz A72019 1/72 TNI-AU Hawk 109/209 ‘Unity Guardian’ The Subject The British Aerospace Systems Hawk is a British single-engine, twin seat advanced trainer aircraft. It is used in a trainer capacity and as a low-cost combat aircraft. First flown in 1974,...
WIP : Airfix 1/72 Hawk 109 Pt. 3 – Finishing
Time to finish this thing. The markings come from Scale Nutz, a defunct decal company based in Singapore. The sheet comes with full stencils for 1 aircraft but enough unit numbers to build any of the Hawk 109 and 209s in TNI-AU service in either squadron. I went with TT-1203 from Skadron 12 for this …...
WIP : Airfix 1/72 Hawk 109 Pt. 2 – Painting
I used a gray color on the parts to check for gaps and thankfully, they weren’t too bad. Painting begins with Tamiya XF-1 Flat Black. First on was freehanded AK Interactive Dark Tan. Based on photos, the camouflage demarcations are solid so I used Tamiya Tape for Curves for these. To prevent overspray, I backfilled …...
WIP : Airfix 1/72 Hawk 109 Pt. 1 – Construction
Next up is another aircraft flown by the TNI-AU and my first modern Airfix kit. As usual, I begin with the ejection seats. The kit comes with seated pilots so no seatbelt details are provided. I made these from 1mm masking tape. Cockpit details are decals and are the same for both cockpits. Oddly, the …...
A visit to Warhammer – Tottenham Court Road
So I visited the UK earlier in June and I made sure to visit a Games Workshop store. Lucky for me there was one near the hotel I was staying at. Even better was the opening hours: they are open till 10pm every Monday-Saturday. The store wasn’t big. But it was packed with people, products …...
Holiday over. Back on the saddle!
I’ve been away from the workbench due to a short holiday to the United Kingdom. Not much on the hobby front there but I did pop by a Warhammer shop. More soon after I write up a small article on it. I’ll get back to finishing my Gustav as soon as I finish unpacking and …...
The need for speed!
Yep! I feel it! Although it’s too bad the Super Hornet is just not as sexy as the Tomcat. View this post on Instagram #Day1 A post shared by Tom Cruise (@tomcruise) on May 30, 2018 at 10:40pm PDT...
WIP : Nitto 1/20 PKA Gustav Pt. 1 – Construction
Time to thin my SF3D/Ma.K stash! This is a PKA Gustav from Nitto when Maschinen Krieger was still known as SF3D. It has since been superseded by a snapfit release from Wave. While this is definitely showing its age with its 1980s engineering and fit, it’s a multimedia kit: it includes brass rods, wires, springs …...
Completed : Fine Molds 1/72 Koensayr BTL-A4 Y-wing Starfighter
Kit Info Brand and Kit Number: Fine Molds Media: Injection Plastic Markings: Custom The Subject The BTL-A4 Y-Wing Starfighter is a single-seat assault fighter-bomber. Heavily armed with laser cannons, ion cannons, proton torpedos and proton bombs, it was deployed by the Republic Navy during the Clone Wars and the Rebel Alliance during...
