Tag: Jets

On the Bench

WIP : Hasegawa 1/72 F-15E Strike Eagle Pt.3 – Painting & Finishing

Painting begins with black for the canopy frame. The nose is a deeper shade of gray so to help make it more visually distinct I used black as a marble coat instead of white. I did both preshading of panel lines and marble coating to help with making a single solid color scheme look less …...

Read More

On the Bench

WIP : Academy 1/72 F/A-18E Super Hornet ‘Top Gun’ Pt.3 – Painting & Finishing

Painting begins with a preshade. Note that I fully painted the canopy frame at this point. The standard color scheme for the F/A-18E/F is a two-tone gray scheme. The topside is listed as FS36320. To slowly build up the opacity I went with very thin (3:7 paint to thinner ratio) coats of Mr Color Aqueous …...

Read More

On the Bench

WIP : Hasegawa 1/72 F-15E Strike Eagle Pt.2 – Construction

Work continues as I attach the nose to the fuselage. There’s a somewhat ugly seamline here which requires getting rid off. Good thing is there’s no rescribing needed as it’s not meant to be a panel line. The gun port is a simple upper and lower join which results in an ugly seamline in a …...

Read More

My Builds

• 2 Comments

Build : Hasegawa 1/72 Mitsubishi F-2A Viper Zero

The SubjectThe Mitsubishi F-2, nicknamed ‘Viper Zero’, is a multirole fighter manufactured by Mitsubishi Heavy Industries and Lockheed Martin for the Japan Air Self-Defence Force (JASDF). It is based on the F-16 Agile Falcon, General Dynamics’ low-cost alternative for the Advanced Tactical Fighter (ATF) competition....

Read More

On the Bench

WIP : Academy 1/72 F/A-18E Super Hornet ‘Top Gun’ Pt.2 – Construction

So far the snapfitting has been good and Academy is commended for minimizing seamlines. There are however some prominent ones that need addressing. The first is the bottom of the LERX. There is also a seamline where the upper and lower halves of the nose join. In the film, whether the inner wing pylons were …...

Read More

On the Bench

WIP : Hasegawa 1/72 F-16C Blk 30 Pt.2 – Painting & Finishing

Time to finish this build. And I lucked out by finding a photo of the exact F-16C that I’d be modeling. The subject of this build will be serial 85-1552, an F-16C Block 30 of the 23rd TFS ‘Fighting Hawks’, 52nd TFW. She deploted to Desert Storm wearing this eye-catching sharkmouth scheme. Interestingly she has …...

Read More

On the Bench

WIP : Hasegawa 1/72 F-16C Blk 30 Pt.1 – Construction

Wait. I thought I had already built a Block 30 F-16C already? Alas, I made a mistake with that one: the exhaust is that of a Block 25 Viper but carries the correct markings of a Block 30. I also really don’t like how I dealt with the walkway markings on that build. I’m now …...

Read More

On the Bench

WIP : Hasegawa 1/72 F-2A Pt.2 – Painting & Finishing

Since I’m attaching the pylons from the beginning, I painted them first with the area around the sway braces being handpainted. The pins were all slightly oversized so I had to make the holes larger for the pylons to fit. The F-2 color scheme is an overall FS35109 medium blue with FS35045 dark blue highlights. …...

Read More

My Builds

Build : Hobbyboss 1/72 Dassault Rafale C

The SubjectThe Dassault Rafale (meaning ‘squall’) is a French twin-engine, delta wing, multirole fighter aircraft. Intended to perform air supremacy, interception, reconnaisance and various strike missions, it is referred to as an ‘omnirole aircraft’ by Dassault. Unlike other contemporary European fighters, the...

Read More

On the Bench

WIP : Hobbyboss 1/72 Rafale Pt.3 – Painting & Finishing

I picked the build up again in February 2024 and while looking at what else needs to be done I reaalized that I had missed out on the a pair of lights on each wingroot. These were quickly handpainted. Based on pictures the inner one is actually a clear panel with the outer one being …...

Read More
Close