WIP : Tamiya 1/72 F-16CM Fighting Falcon Pt.4 – Finishing
While waiting for the gloss coat to cure, I decided to tackle the exhaust. After a base of black and painting the inside white, the outside is painted with Vallejo Model Color Pale Burnt Metal. I then masked off the exhaust petals with both 1mm masking tape and liquid mask. Yes each individual petal. The …...
WIP : Tamiya 1/72 F-16CM Fighting Falcon Pt.3 – Painting
After fixing the few gaps, it’s time to put some color on this kit! First, the stealth coat with Tamiya XF-1 Flat Black. Then a marble coating with Tamiya XF-12 IJN Gray. The instruction sheet made a mistake in calling out 3 gray tones for the camouflage. By 2010, this jet only has 2 gray …...
WIP : Tamiya 1/72 F-16CM Fighting Falcon Pt.2 – Construction
Disappointingly, Tamiya left some visible ejector pin marks on the gear doors which need to be addressed. Tamiya calls for some blue and silver colored parts inside the gearbay. Not sure how accurate this is. The main undercarriage is designed to be installed from the beginning. While troublesome, the upside is a stronger fit. The...
WIP : Tamiya 1/72 F-16CM Fighting Falcon Pt.1 – Construction
Next on the factory floor is this Tamiya kit which looks to be as shake and bake as it will ever get. This is the 2nd release where Tamiya added the pylons, underwing stores, armaments and targeting pods. Checking the parts, I realized that by adding 1 component, I can model the F-16CM, an upgraded …...
WIP : Hasegawa 1/72 F-16A ADF ‘AMI’ Pt. 5
After another gloss coat over the decals, it was time for weathering. I went with Raw Umber oil paint this time and I like how it turned out. It’s subtle on the dark gray sections so I did the wash twice. The weathering looks more obvious on the bottom. Then the pylons, stores, landing gear …...
WIP : Hasegawa 1/72 F-16A ADF ‘AMI’ Pt. 4
It took a few rounds but the salt weathering is done. It’s still a bit subtle but I think it should look better after some weathering with oil paints. The F-16 I’m modeling requires a black tail and pattern on the nose so I masked and sprayed Black Grey for this. After a day of …...
WIP : Hasegawa 1/72 F-16A ADF ‘AMI’ Pt. 3
OK… another Queen off the shelf. Painting begins with trying something new. While painting the P-51, I sprayed the leftover paint in the cup on the F-16 in a random pattern. The intention is to have a randomly colored base to cause some variation in the main colors. I then smoothen the base coat with …...
WIP : Lockheed Martin F-16A ADF ‘AMI’ Pt. 2
Work on the cockpit begins. The consoles are all decals. Looks decent enough especially since I’m keeping the canopy closed. Ejection seat next. There’s quite a few details missing like the prominent canopy breakers and the green oxygen bottle on the left side of the seat. I added seatbelts using strips of masking tape. They...
WIP : Lockheed Martin F-16A ADF ‘AMI’ Pt.1
I previously previewed this, decided to just try to quickly build one (yeah right). This will be the F-16A ADF (Air Defense Fighter) from the Italian Air Force (AMI – Aeronautica Militare Italiana). As of 2011, the AMI operates 27 ADFs in an air defence mission. The Hasegawa kit is from the 1980s and it’s …...
