WIP : Tamiya 1/72 F-16CM Fighting Falcon Pt.2 – Construction
Disappointingly, Tamiya left some visible ejector pin marks on the gear doors which need to be addressed. Tamiya calls for some blue and silver colored parts inside the gearbay. Not sure how accurate this is. The main undercarriage is designed to be installed from the beginning. While troublesome, the upside is a stronger fit. The...
WIP : Tamiya 1/72 F-16CM Fighting Falcon Pt.1 – Construction
Next on the factory floor is this Tamiya kit which looks to be as shake and bake as it will ever get. This is the 2nd release where Tamiya added the pylons, underwing stores, armaments and targeting pods. Checking the parts, I realized that by adding 1 component, I can model the F-16CM, an upgraded …...
WIP : Hasegawa 1/48 F-104J Starfighter Pt. 6 – Finishing
Once fully cured and wiped down, I sprayed another layer of gloss to prep for a panel wash. This time I decided to do it with Vallejo Dark Grey Model Wash instead of the usual Mig AMMO panel wash. I figured this one will give a subtler effect. I haven’t used it in a while …...
WIP : Hasegawa 1/48 F-104J Starfighter Pt. 5 – Finishing
I begin with a gloss coat. I use AK Interactive’s Intermediate Gauzy, thinned 1:1 with water. There’s a tendency for gloss or flat coats to change the tone of metal paints but I’m glad to say that it works well with metal paints. Markings will be from the TwoBobs ‘F-104J Komatsu Starfighters’ sheet. As usual...
WIP : Hasegawa 1/48 F-104J Starfighter Pt. 4 – Painting
Painting the bare metal finish is next. I’ve had good results from the Vallejo Metal Color line which are acrylics, a more exotic choice than the usual lacquers like Alclad. I begin by masking off the colored areas with masking tape and paper. First on is Metal Color Aluminium. The paint goes on easily when …...
WIP : Hasegawa 1/48 F-104J Starfighter Pt. 3 – Painting
Painting begins with a black base with Tamiya XF-1 Black. The F-104J I’m modeling is a unit from the 202nd Hikotai, 5th Kokuden out of Nyutabaru Air Base in 1979. It sported a custom scheme over its all metal finish when it flew as an aggressor. So out come Tamiya XF-2 Flat White for the …...
WIP : Hasegawa 1/48 F-104J Starfighter Pt. 2 – Construction
Once properly painted, washed and weathered, the out of the box cockpit looks good. Fit in general is good. The instructions don’t call for it but I added some fishing weights in the nose just in case. The tip of the tail broke off during construction. This was fixed with plastic plates. As usual, some …...
WIP : Bandai 1/144 RGC-80 GM Cannon Pt.1 – Construction
It’s actually quite strange that Bandai still hasn’t issued any of the Federation mobile suits in the MSV line but have done so for the much newer Origin MSV. Oh well, if I knew what’s going on, I’d be the product line manager for Bandai. In any case, I sought to modify the Origin MSV …...
WIP : Hasegawa 1/48 F-104J Starfighter Pt. 1 – Construction
Trying to get my building routine going again, I decided to tackle a 1/48 kit next. This will be an F-104J flown by the Japanese Air Self-Defense Force dressed in ‘Aggressor’ markings in the 1970s. I got this kit used from an online seller and it came with a set of aftermarket resin wheel bays …...
WIP : Fujimi 1/72 RF-4C Phantom II Pt.5 – Finishing
Time to finish this thing. First an overall gloss coat to prep for decals. The AirDOC decals are printed by Cartograph and look very good. However, all the aircraft numbers and codes are individually printed and need to be added 1 at a time. I decided to use the slime lights from the Hasegawa sheet …...
