WIP : Academy 1/72 F-14B Tomcat Pt.2 – Painting & Finishing
Painting a weathered F-14 is always challenging but fun. The key I think is to build up the effects layer by layer. I began with a base coat of black with the marble coating using white and brown. Note I avoided the panel lines and have kept them black except for areas in the rear …...
WIP : Platz 1/72 Mitsubishi F-1 Pt.2 – Painting & Finishing
Due to how the gearbay doors work on the real F-1, this kit requires the landing gear to be installed from the beginning. At first, I was worried that I would break them during the painting stage. However, it allowed me to a make sure that they fit properly and strongly. The landing gear were …...
WIP : Platz 1/72 Mitsubishi F-1 Pt.1 – Construction
Took me a while to get this post up but it’s finally here. This is a modern kit of this 1980s strike fighter and is the only other option besides the old Hasegawa release. I began as usual with dryfitting the majority of the parts, using masking tape to keep the parts in place. The …...
WIP : Academy 1/72 F-14B Tomcat Pt.1 – Construction
Another year, another Tomcat. This time it’s the much talked about new mold F-14 from Academy. It’s been getting raves around the community. Hopefully it lives ups to the hype and I can retire my old Hasegawa kits. First impressions though is somewhat disappointing as Academy has chosen to simply re-use the boxart from the...
Completed : Trumpeter 1/72 North American F-100F Super Sabre ‘Wild Weasel I’
Number 10 of 2021...
WIP : Hobbyboss 1/72 F-100F Super Sabre Pt.2 – Painting & Finishing
I decided to order a spare canopy direct from Trumpeter and received it after about 1.5 months. It still has the same fitting issues as the old one but at least it’s not cracked. In any case, I can finally start painting the kit. I began with a base of black. Then I added a …...
Completed : Academy 1/72 Boeing AH-64E Apache Guardian ‘TNI-AD’
Kit InfoBrand: Academy 12514Scale: 1/72Media: StyreneMarkings: CJM AH-64E Apache Guardian + Kit stencils The SubjectThe Boeing AH-64 Apache is an American twin-turboshaft attack helicopter for a crew of two. It is armed with a 30mm M230 chain gun carried under the forward fuselage and has four hadpoints on stub-wing pylons for more...
WIP : Academy 1/72 AH-64E ‘TNI-AD’ Pt.3 – Painting & Finishing
Time to paint and finish this build. I started with my usual black base and white marble coating. As we shall see later, it wasn’t that effective. The AH-64E fielded by the TNI-AD comes in a 2-tone camouflage of olive drab and green. The CJM decal sheet states that the olive drab is FS34031. I …...
WIP : Academy 1/72 AH-64E ‘TNI-AD’ Pt.2 – Construction
The rotor is next. The base kit is an AH-64D so I need to modify it to the one that equips the AH-64E. My reference for this comes from the Hasegawa AH-64D and E instruction sheets. I made sure they were the same size and then superimposed them together to get a better idea of …...
