Tag: F-16

My Builds

Completed : Academy 1/48 Lockheed Martin F-16A Fighting Falcon ‘TOPGUN 51’

Kit Info Brand: Academy 1688 Scale: 1/48 Media: Styrene Markings: TwoBobs ‘F-16 NSAWC Vipers’ 48-069 The Subject The Lockheed Martin (originally General Dynamics) F-16 Fighting Falcon is a multirole jet fighter. It currently serves in at least 25 nations, with over 4,400 aircraft built. Commonly known as the ‘Viper’, it...

Read More

On the Bench

WIP : Academy 1/48 F-16A ‘TOPGUN 51’ Pt.6 – Painting & Finishing

So we finally come to the meat and potato parts of the build: painting and finishing. I begin with a base coat of Mr Hobby Black Surfacer 1500 thinned with Mr Leveling Thinner which results in a smooth and semi-gloss surface. This is now my go-to base coat when I can spray outdoors. For the …...

Read More

On the Bench

WIP : Academy 1/48 F-16A ‘TOPGUN 51’ Pt.5 – Construction

It’s been a long WIP but it’s finally the last post for this one. The kit only comes with decals for the console details although it comes with detailed foot pedals. Very odd choice by Academy. There’s no open canopy option although I’ve always intended to keep this one closed anyway so I’ll live with...

Read More

On the Bench

WIP : Academy 1/48 F-16A ‘TOPGUN 51’ Pt.4 – Construction

Since I took the time to correct 1 aspect of the kit, I inevitably had to go ahead and try to correct the other more obvious ones. Unlike the Hasegawa kit, the missile rails here are separate but was designed to fit in a strange way with the connecting point being visible. The tab also …...

Read More

On the Bench

WIP : Academy 1/48 F-16A ‘TOPGUN 51’ Pt.3- Construction

Work continues wiith corrections and making my life easier after assembly. The Aggressor F-16A usually flies clean without any pylons and stores. The kit comes with the holes for the pylons already open and will need to be filled. First I closed up the holes from the inside with plastic plates. I then inserted sprues …...

Read More

On the Bench

WIP : Academy 1/48 F-16A ‘TOPGUN 51’ Pt.2 – Construction

More work with plastic plates in this post. Let’s get to it. The gearbays on this kit are all bare. This is especially obvious when comparing them to the ones on the Tamiya kit. The intake when fitted leaves a noticeable step on the port side joint. Luckily it’s only a matter of trimming the …...

Read More

On the Bench

WIP : Academy 1/48 F-16A ‘TOPGUN 51’ Pt.1 – Construction

Seeing as how badly I’d done my 414th CTS F-16C and how it has fallen apart, I’ve decided to have another go at an F-16 for this year’s annual Aggressor build. Based on some research, I thought the Academy would be a simplified version of the Hasegawa kit and therefore would be a quick build. …...

Read More
Close