WIP : Academy 1/72 T-50I Golden Eagle Pt.4 – Finishing
With the landing gear settled, I went ahead to paint the small details and wingtip lights with a paint brush. A section of the starboard side of the tail is unpainted. I masked this off and (ironically) painted it the same color as the exhaust. During this time, the owner of Cap Jempol Metal (CJM), …...
WIP : Academy 1/72 T-50I Golden Eagle Pt.3 – Painting
I managed to carefully re-attach the main landing gear with CA glue. Painting begins with a base coat of black and a marble coat of white. TNI-AU T-50s are painted in a two-tone scheme of FS36314 (a light gray) and FS34148 (a medium greenish gray). As of 2025, only the MRP line offers FS34148 as …...
WIP : Academy 1/72 T-50I Golden Eagle Pt.2 – Construction
The nose gearbay is made up a small tub piece from Tori Factory and the bottom of the cockpit assembly. I used Epoxy Putty to secure the Tori part. I test fit the main gearbay into the slot and noted that some further trimming is required at the rear of the slot for proper alignment. …...
WIP : Academy 1/72 T-50I Golden Eagle Pt.1 – Construction
Time for my annual Indonesian Air Force build. This time it’s the current jet trainer, the T-50i Golden Eagle. The only kit available is this simplified one from Academy which features snapft parts and no landing gear. Tori Factory from South Korea makes upgrade sets for the kit and I snagged a copy of their …...
WIP : Revell 1/72 MiG-21F-13 ‘AURI’ Pt.4 – Painting & Finishing
Once the main painting is done I picked out the details like the exhaust and gun port. Then a gloss coat with AK Gauzy is done to get ready for decals. Markings will come from Scale Nutz. This is a long out of production sheet from almost two decades ago. Let’s see how it holds …...
WIP : Revell 1/72 MiG-21F-13 ‘AURI’ Pt.3 – Painting & Finishing
After masking the canopy, I carefully cemented it into place with the help of some pressure to get it to fit with minimal gaps. The canopy frame needs pre-painting but I wasn’t sure what’s the correct color so I just went with the tried and true black. The MiG I’m modeling has a red shock …...
WIP : Revell 1/72 MiG-21F-13 ‘AURI’ Pt.2 – Construction
Once general assembly is done it’s time to deal with the nose profile. To my eye, the angle of the slope on the kit is just that minorly too sharp. First though I have to deal with the shock cone which is molded with 4 attachment arms. This is wrong as it should only arms …...
WIP : Revell 1/72 MiG-21F-13 ‘AURI’ Pt.1 – Construction
For my next Indonesian Air Force build, I’m tackling the MiG-21F-13 that served the AURI in the early 1960s. Revell kits can be quite hit or miss, how will this one fare? A quick dryfit shows decent fit. The details are very finely done but the leading edge of the wing root gap is quite …...
Completed : Hasegawa 1/72 Lockheed Martin F-16A Fighting Falcon ‘Tentara Nasional Indonesia – Angkatan Udara (TNI-AU)’
Kit InfoBrand: 1/72 Hasegawa 00188Media: StyreneMarkings: Kit and Zotz Decals 72-016 ‘Vivacious Vipers #2’ The SubjectThe Lockheed Martin (originally General Dynamics) F-16 Fighting Falcon is a multirole jet fighter. With over 4,400 aircraft built, it currently serves in 25 nations. Commonly known as the ‘Viper’, it...
WIP : Hasegawa 1/72 F-16A ‘TNI-AU’ Pt. 3 – Painting & Finishing
So in the last post I’d taken off the masking of the walkways and was checking my work and I felt that there was something wrong… At 0.7mm the walkways were too thick. They need to be thinner. So out with the masking tape again and I carefully painted the colors of the scheme over …...
