WIP : Hasegawa 1/72 F-104J Starfighter ‘JASDF’ Pt.2 – Painting & Finishing
I’ll be painting this Starfighter in its initial bare metal finish scheme from the 1970s. Hasegawa’s instruction doesn’t include this scheme so I based the color callouts on the Fine Molds F-104J instructions instead. Painting begins with a base of black. The wings were painted white for the top side with RC222 Real...
Build : Hasegawa 1/72 Mitsubishi F-2A Viper Zero
The SubjectThe Mitsubishi F-2, nicknamed ‘Viper Zero’, is a multirole fighter manufactured by Mitsubishi Heavy Industries and Lockheed Martin for the Japan Air Self-Defence Force (JASDF). It is based on the F-16 Agile Falcon, General Dynamics’ low-cost alternative for the Advanced Tactical Fighter (ATF) competition....
WIP : Hasegawa 1/72 F-2A Pt.2 – Painting & Finishing
Since I’m attaching the pylons from the beginning, I painted them first with the area around the sway braces being handpainted. The pins were all slightly oversized so I had to make the holes larger for the pylons to fit. The F-2 color scheme is an overall FS35109 medium blue with FS35045 dark blue highlights. …...
WIP : Hasegawa 1/72 F-2A Pt.1 – Construction
The first build of 2024 is Japan’s indigenous F-16 variant, the F-2 Viper Zero. Hasegawa usually makes some extra effort with Japanese subjects, let’s see how this one builds up. First impressions are mixed. This mold is from 1998 but it’s barely more detailed than the F-16 that’s from the 1980s. A plus is that...
WIP : Platz 1/72 Mitsubishi F-1 Pt.2 – Painting & Finishing
Due to how the gearbay doors work on the real F-1, this kit requires the landing gear to be installed from the beginning. At first, I was worried that I would break them during the painting stage. However, it allowed me to a make sure that they fit properly and strongly. The landing gear were …...
WIP : Platz 1/72 Mitsubishi F-1 Pt.1 – Construction
Took me a while to get this post up but it’s finally here. This is a modern kit of this 1980s strike fighter and is the only other option besides the old Hasegawa release. I began as usual with dryfitting the majority of the parts, using masking tape to keep the parts in place. The …...
