A look at Rocket Punch in 2021
I finished 11 kits (again) for 2021! I was one short of my target even though the Covid-19 pandemic was still ongoing and I was home a lot more. I also didn’t have a ‘shitty’ build this year which would have eaten up a lot of time so I’m not quite sure why I slowed …...
Completed : Wave 1/20 SAFS
Number 11 of 2021...
WIP : Wave 1/20 SAFS – Construction & Finishing
I found another Shelf Queen which was quite near to the painting stages so what better time than do roll up the sleeves and finish it? Most of the gap filling had already been done although I spotted more things that I needed to fix. The Wave kits use polycaps for attaching the limbs so …...
Completed : Trumpeter 1/72 North American F-100F Super Sabre ‘Wild Weasel I’
Number 10 of 2021...
WIP : Hobbyboss 1/72 F-100F Super Sabre Pt.2 – Painting & Finishing
I decided to order a spare canopy direct from Trumpeter and received it after about 1.5 months. It still has the same fitting issues as the old one but at least it’s not cracked. In any case, I can finally start painting the kit. I began with a base of black. Then I added a …...
WIP : Hasegawa 1/72 VF-0D Pt.2 – Construction
I’ve always used round brass rods to mount my kits because the holes are much easier to drill out. However, the kit can spin in place with a round rod if I don’t use some sort of glue to secure it in place. I’ve previously used a polycap but the clutch eventually wore out and …...
Completed : Academy 1/72 Boeing AH-64E Apache Guardian ‘TNI-AD’
Kit InfoBrand: Academy 12514Scale: 1/72Media: StyreneMarkings: CJM AH-64E Apache Guardian + Kit stencils The SubjectThe Boeing AH-64 Apache is an American twin-turboshaft attack helicopter for a crew of two. It is armed with a 30mm M230 chain gun carried under the forward fuselage and has four hadpoints on stub-wing pylons for more...
WIP : Hasegawa 1/72 VF-0D Pt.1 – Construction
This will be an OOB build of the twin-seater version of the VF-0 Phoenix from Macross Zero. With its delta wings, I’ve always gotten the Dassault Mirage 2000 vibes from the VF-0D so I’ve also always planned to give the kit the same color scheme as the Mirage 2000D. But while playing around with the …...
WIP : Academy 1/72 AH-64E ‘TNI-AD’ Pt.3 – Painting & Finishing
Time to paint and finish this build. I started with my usual black base and white marble coating. As we shall see later, it wasn’t that effective. The AH-64E fielded by the TNI-AD comes in a 2-tone camouflage of olive drab and green. The CJM decal sheet states that the olive drab is FS34031. I …...
WIP : Academy 1/72 AH-64E ‘TNI-AD’ Pt.2 – Construction
The rotor is next. The base kit is an AH-64D so I need to modify it to the one that equips the AH-64E. My reference for this comes from the Hasegawa AH-64D and E instruction sheets. I made sure they were the same size and then superimposed them together to get a better idea of …...
