WIP : Bandai 1/72 X-wing starfighter Pt. 1 – Construction
In the middle of getting bogged down with the fitting issues of my F-5, I decided to get this already snapfitted kit done. As usual, it was a joy to snapfit and 99% of it doesn’t require cement. Out of the box, this builds into Luke Skywalker’s Red 5 from the Battle of Yavin, and …...
Completed : Italeri 1/72 Grumman EF-111A Raven
Kit Info Brand and Kit Number: Italeri #1235 Media: Injection Plastic Markings: Cutting Edge Modelworks CED72048 EF-111A Sparkvark Nose Art The Subject The EF-111A Raven was an electronic warfare aircraft designed to replace the USAF’s B-66 Destroyer. Grumman was contracted in 1974 to convert 42 existing General Dynamics F-111A...
WIP : Italeri 1/72 EF-111A Raven Pt. 4
Decaling begins with a gloss coat. I’ve had very good results with AK Interactive Intermediate Gauzy Agent. With a 1:1 thinning with water, it gives a very shiny and smooth gloss without as many problems as other gloss coats I’ve used. The markings comes from Cutting Edge Modelworks’ EF-111 Sparkvark sheet (CED72048)....
Upcoming : Max Factory 1/72 Soltic Big Foot
Max Factory is finally releasing the Big Foot from the anime Fang of the Sun Dougram, which is one of my favorite designs from the series. To be honest though, I really paid more attention it after it appeared in Battletech, where it was called the Battlemaster. This was one of the designs FASA appropriated …...
Upcoming : Hasegawa 1/72 VF-1J Siegfried
This is coming in June and the boxart has been released. All I can say is…. FWAH!...
WIP : Italeri 1/72 EF-111A Raven Pt. 3
I’ve been a big fan of Gary Wickham of ScaleSpot and is constantly amazed at his detailed work. In his 1/32 Mosquito build, he showed a method of breaking up the monotony of a single color scheme so I thought I’d try it here but in a simpler form. The first step is to spray …...
WIP : Italeri 1/72 EF-111A Raven Pt. 2
Work continues as there’s more to fix than expected. First up is the joint between the 2 halves of the fuselage, which isn’t as smooth as I hoped. I should have added a spreader on the rear half so the transition between the halves is smoother. I tried various methods including Perfect Plastic Putty, correction …...
WIP : Italeri 1/72 EF-111A Raven Pt. 1
For my next build, I decided to tackle a modern aircraft. This time it’ll be the Italeri 1/72 EF-111A Raven or ‘Sparkvark’. The kit is a rebox of a release in the mid 1980s by Esci. Details are good for its age and features recessed panels. The cockpit features decals for the restraints and the …...
Completed : Hasegawa 1/72 Northrop Grumman/Stonewell/Shinsei VF-0C Phoenix
Kit Info Brand: Hasegawa Scale: 1/72 Media: Injection Plastic Markings: Kit The Subject The VF-0 is a development variable fighter pressed into service during the Mayan conflict in 2008 (as depicted in Macross Zero). Introduced in 2004, it is a trial production and testbed using Overtechnology for future variable fighters like the VF-1....
WIP : Hasegawa 1/72 VF-0C Phoenix Pt. 7
There’s a very obvious step on the wing joints which I try my best to fix. Nothing too drastic like sanding like mad though. Just an attempt to make the step look less jarring. Painting begins with a base of black primer. I’m going with the camo from the kit instruction since I couldn’t come …...
