WIP : Academy 1/72 F-86F Sabre Pt. 1
While I struggle with bad fits on other builds, this particular bad fitting kit is finally up for painting. This 1/72 Academy F-86F will be my first ever BMF build. First up is base coating with gloss black. And since there’s no easy way to add a handle for easy er… handling, I decided to …...
Completed : Hasegawa 1/48 Douglas A-4E Skyhawk ‘TOPGUN 56’
Kit Info Brand: Hasegawa Scale: 1/48 Media: Injection Plastic The Subject The Douglas (later McDonnell Douglas) A-4 Skyhawk is a single seat subsonic carrier-capable attack aircraft originally developed for the US Navy and US Marine Corps. While relatively lightweight, it was nimble, had a top speed of more than 670mph and could carry...
Completed : Skunkmodels 1/72 General Atomics MQ-9 Reaper
Kit Info Brand: Skunkmodels Scale: 1/72 Media: Injection Plastic The Subject The General Atomics MQ-9 Reaper is an unmanned aerial vehicle (UAV) capable of both remote and autonomous flight operations. It was developed by General Atomics Aeronautical Systems for the USAF and is a larger, heavier and more capable UAV than the General...
WIP : 1/48 A-4E Skyhawk ‘TOPGUN 56’ Pt. 2
Another queen (this time from 2011) joins the masses. 😀 This is a Hasegawa 1/48 Skyhawk kit to be draped as TOPGUN 56, an A-4E flown by the US Navy as an Aggressor. The scheme is very unique with a desert camo MiG-17 silhouette superimposed on the aircraft. This build is heavily reliant on the …...
WIP : 1/72 Skunkmodels Reaper Pt. 2
Yeah it took a while but I’m almost done with this one. There has been quite a few minor disasters but none too serious luckily. I still have the antenna, weapons and navigation lights left to complete. Hopefully I can finish this by the end of the week....
WIP : 1/72 Skunkmodels Reaper Pt. 1
I couldn’t resist starting on this when it arrived a few days ago. A pleasant surprise is the inclusion of 2 units of MQ-9s in the box, with 2 complete sets of decals too. A greater surprise is how big the MQ-9 actually is… It came together straightforward enough although the in order to get …...
Completed : Academy 1/72 Vought F-8E Crusader
Kit Info Manufacturer: Academy Scale: 1/72 Media: Injection Plastic The Subject The Vought F-8E Crusader was a single-engined, carrier-based air superiority jet aircraft which replaced the Vought F7U Cutlass in the US Navy and Marine Corps fleets. Known for its distinctive variable-incidence wing which pivoted by 7° out of the fuselage...
WIP : Hobbyboss 1/72 F-14B Tomcat Pt.1
The next project is a new kit instead of finishing a shelf queen. My friend said that this kit was quite straightforward compared to the Hasegawa. Let’s see shall we? First impressions are good so far. The panel lines aren’t as fine as Hasegawa’s but aren’t as deep as the Revell’s. Shape looks alright too....
WIP : 1/72 Academy F-8E Crusader Pt. 6
I spent some time fiddling with the canopy to get it to fit flush with the fuselage but it seems like the tolerance is very tight and the Future coat actually made the canopy thicker. I ended up resorting to some sanding and leaving out the back section of the canopy. And then it was …...
WIP : 1/72 Academy F-8E Crusader Pt. 5
I decided to give Lifecolor UA035 Flat Light Gull Gray a go and it turned out to be a more ‘correct’ shade of FS36440. Layering over the previous warmer shade of gray probably changed the color somewhat but it’s OK as long it looks more ‘right’ to my eyeball 1.0. Since the Crusader marking I’m …...
