Written by 4:15 pm On the Bench

WIP : 1/48 A-4E Skyhawk ‘TOPGUN 56’ Pt. 2

Another queen (this time from 2011) joins the masses. 😀

This is a Hasegawa 1/48 Skyhawk kit to be draped as TOPGUN 56, an A-4E flown by the US Navy as an Aggressor. The scheme is very unique with a desert camo MiG-17 silhouette superimposed on the aircraft. This build is heavily reliant on the excellent article by David Aungst at Hyperscale and the info found on the TwoBobs decal sheet.

As I restart this build, the kit is already in a grey-primed state and the undercarriage parts were handpainted in white and given a wash of Black Grey a long while back. I didn’t do a very good job at them to be honest. I’ll see if I can live with it down the road. It’s more important to do the camouflage properly as that’s the highlight of this build.

I decided to preshade with Black Grey instead of re-black basing the whole kit. As usual, I’m not that particular nor neat about the way I do it but I do make sure I didn’t paint the undercarriage bays.

So first up I painted with Lifecolor UA023 Gray color on the parts of the aircraft that’s grey. The rest I left as is with the preshade on. Using blu-tack to mask, I then tackled the bottom with Model Master Acryl Medium Grey. I didn’t get the pattern right and there’s overspray but I’ll fix those in the fine-tuning stage.

I also then sprayed the undercarriage bays with Game Color Dead White.

For the top-side camouflage pattern, I first painted Model Color Desert Yellow.

Then it was Model Color US Tan Earth for the darker brown color. Both of these were done with blu-tack masking.

The colors I’ve used aren’t 100% correct but the photo references available are all scans of old 35mm photos which don’t have the correct color fidelity anyway. Close enough is good enough for me. Next up is corrections and fine-tuning of the camouflage.

Build Log
Part 1 | Part 2

(Visited 788 times, 1 visits today)
Tags: , , , , , , , , Last modified: 22 February, 2023