Tag: Cold War

On the Bench

WIP : Academy 1/72 F-86F Sabre Pt. 2

Finally onto decaling stage and the Academy decals are… crap. They take a long time to detach from the backing, are quite fragile, and doesn’t really react to Mark Softer. Since I don’t have Mark Setter I resorted to Future to stick some errant decals onto the surface. There were quite a few tearings so …...

Read More

On the Bench

WIP : Academy 1/72 F-86F Sabre Pt. 1

While I struggle with bad fits on other builds, this particular bad fitting kit is finally up for painting. This 1/72 Academy F-86F will be my first ever BMF build. First up is base coating with gloss black. And since there’s no easy way to add a handle for easy er… handling, I decided to …...

Read More

My Builds

Completed : Academy 1/72 Vought F-8E Crusader

Kit Info Manufacturer: Academy Scale: 1/72 Media: Injection Plastic The Subject The Vought F-8E Crusader was a single-engined, carrier-based air superiority jet aircraft which replaced the Vought F7U Cutlass in the US Navy and Marine Corps fleets. Known for its distinctive variable-incidence wing which pivoted by 7° out of the fuselage...

Read More

On the Bench

WIP : 1/72 Academy F-8E Crusader Pt. 6

I spent some time fiddling with the canopy to get it to fit flush with the fuselage but it seems like the tolerance is very tight and the Future coat actually made the canopy thicker. I ended up resorting to some sanding and leaving out the back section of the canopy. And then it was …...

Read More

On the Bench

WIP : 1/72 Academy F-8E Crusader Pt. 5

I decided to give Lifecolor UA035 Flat Light Gull Gray a go and it turned out to be a more ‘correct’ shade of FS36440. Layering over the previous warmer shade of gray probably changed the color somewhat but it’s OK as long it looks more ‘right’ to my eyeball 1.0. Since the Crusader marking I’m …...

Read More

On the Bench

WIP : 1/72 Academy F-8E Crusader Pt. 4

After another round of fixing the seams and rescribing, I called it done and did a final primer coat to prep for painting. For this kit I used Vallejo White Primer instead of the usual Tamiya rattle can primer. It required multiple thin coats but at least it doesn’t smell as bad. As is the …...

Read More

On the Bench

WIP : 1/72 Academy F-8E Crusader Pt. 3

Work continues on this kit with fixing seamlines. This kit has a lot of panel lines and rivets that get obliterated due to sanding. I rescribed with a needle + pin vise combo using a strip of dymo tape as a guide. I choose to not redo the rivets just because :). It was also …...

Read More

On the Bench

WIP : 1/72 Academy F-8E Crusader Pt. 2

Now it’s time to put the two halves of the fuselage together. First up, the myriad parts I needed to assemble before hand. Incidentally, all were sprayed white. Academy provides a long trunking so you can see into the nose intake. Nice. From left to right: the MLG bay, the belly flap bay and the …...

Read More

On the Bench

WIP : 1/72 Academy F-8E Crusader Pt.1

Like all aircraft kits, I started with the cockpit. The details are basic but acceptable for 1/72. Control panels are recessed but Academy conveniently includes decals. The ejection seat is made up of 4 parts. It doesn’t have any seatbelt details. This is handbrushed, washed and drybrushed to bring out the details. I decided to...

Read More

Previews

Preview: 1/72 Gran’ Ltd C-75 (SA-2 Guideline)

Kit Info Manufacturer: Gran’ Ltd Scale: 1/72 Media: Injection Parts: 32 Price: Rp. 140,000 The Subject The Lavochkin OKB S-75 (Russian С-75, NATO reporting name SA-2 Guideline) is a high-altitude surface-to-air guided missile (SAM) system of the Soviet Union and is the most widely deployed and used air defense missile in...

Read More
Close