Brand and Kit Number: Bandai #0148831
Media: Injection Plastic
Markings: Gundam Decal Set #22 and #30
The RGM-79Q GM Quel is the first mass-produced mobile suit deployed by the Titans, the elite peacekeeping force founded by the Federation after the events of Operation Stardust in UC0083. It is designed for deployment inside space colonies for peacekeeping, riot control and suppression. Manufactured in Luna II, it is an upgraded and less complex version of the RGM-79N GM Custom. By the beginning of the Gryps Conflict in UC0087, it is considered out-dated and has been replaced by newer mobile suits.
The GM Quel first appeared in the OVA series Mobile Suit Gundam 0083: Stardust Memory. It was on screen for less than a second rolling up on a flatbed and getting readied by technicians.
Info from Gundam Wiki
Part of the long line of kits in Bandai’s HGUC series, this kit was released in 2007. As usual, it’s fully snapfit and is molded crisply in multiple colors. Like other HGUC kits released during this time, it’s much easier to keep this kit in separate subassemblies for painting than ever before. However, the limbs still required some modification to facilitate that. Poseability is also improved from previous generation HGUC kits but still nothing to write home about.
The kit depicts the GM Quel as it appears in the Advance of Zeta: The Flag of Titans, a side story about the Titans Test Team as serialized in Dengeki Hobby Magazine. The proportions of the GM Quel are bulkier here than how it originally appeared in Mobile Suit Gundam 0083: Stardust Memory.
As mentioned above, the breakdown of this kit is decent with the only hang-up being the elbow (fixed to the lower arms) and knee (fixed ot the lower legs) joints. I decided not to modify them and simply hand paint the joints later. I find the proportions not quite right on this kit: the head is on the small side, the neck is (typical of HGUC) short, hips are wide, and the knees are too big. I decided to do some slight modifications. First I replaced the whole waist on down with parts from the HGUC GM Custom. The legs are slightly different in design but nothing too major. I then extended both the neck and the waist by about 1.5mm using plastic sheet. I also changed the weapon to the FN P90-looking one from a Kotobukiya MSG weapon set. The pistol grip needed some trimming before it fit into the hand. A very small piece of blutack keeps the fit solid. Lastly was swapping the thrusters on the backpack with those from the GM Custom. During construction I managed to break off the antenna on the head which I replaced with 0.5mm brass rod.
Colors & Markings
I decided to go with the default colors this time and concentrate on seeing if I can add color variations to the finish. I first thinned AK black primer with lacquer thinner to see if it will result in a better finish but I may have overthinned the primer as it split. After re-priming everything with the standard AK primer, I added a thin layer of the main color in random splotches and squiggly lines. Then I added a very thin blending coat of the same color on top of this. However, this didn’t quite work out as the variation didn’t really show through. I decided to move on and finish the build.
The blue on the GM Quel is a very dark blue (purple in some publications) but I went with a lighter shade instead. I went with gray black for the torso. After the primary colors were done I went back to hand paint all the smaller details like the small vents on the upper torso, verniers, the forehead piece and the elbow joints. The green sensors on the feet and the head were given a base of white and then hand painted transparent green. Color-wise, the only change was painting all the verniers and thrusters yellow instead of red.
For the markings, I mixed and matched from various Bandai Decals and a generic sheet. As usual, I went easy with the decals. The Bandai decals have yellowed somewhat but once given enough of a soak, came off the backing quite easily and reacted very well with Mark Softer. No ‘nose art’ for this one which would have gone on the shield.
Weathering is kept mild starting with a general oil wash of black. I then hand painted some light chipping with black gray and dark grey blue paint. I also added some streaks with oil paint. After that it was a light dry brush all over the kit with medium gunship gray. After a final flat coat, I went back to brush on Future on the green parts to gloss them back up and dirtied up the feet using Tamiya Weathering Masters. The last step was to remove the blu-tack masking on the visor which was also given a dip in Future way back when. I managed to chip off some paint above the visor which I had to go back in to fix with hand painting.
This didn’t turn out quite as expected but all in all, barring the failed paint variation, it was quite trouble-free. My collection of Federation mass produced mobile suits are now starting to get off the ground. Hopefully more to come soon and I can get a unifying theme going.
Number 5 of 2017
After the EF-111A Raven, I’ve been trying to get this completed before the end of April. I tried to get some paint variation like my previous build but it didn’t turn out that well. I also tried to see if I can get a stronger base coat to prevent the paint from being scratched off as is typical of acrylics. I thinned the AK Interactive Black Primer with lacquer thinner but the thinner split the paint. Perhaps I overthinned. Anyway, I quickly finished off the painting to get this build completed.
Mild weathering is next and I can call this done.
Next in the HGUC line is the weirdly proportion mass production Barzam from Mobile Suit Zeta Gundam. Even though it’s oddly shaped, it’s actually designed by the famous Mamoru Nagano. There is a Refined Barzam design that was done by Hajime Katoki for Gundam Sentinel that brought the design more in-line with the Gundam Mk. II. Hopefully they will release that design too.
Pictures show that this kit will have quite extensive poseability in the arms which bodes well for future releases. It’s coming in in May for 1,620 JPY. More pictures on Hobby Search.
This is my version of the RGM-79Q GM Quel operated by the Titans of the Earth Federation. It’s my entry into Plamo’s WOOB 07.
I’m combining the upper body and arms of the HGUC GM Quel with the bottom half of the HGUC GM Custom. Why? I find the lower portion of the HGUC GM Quel to be too blocky and it looks disproportionate. It’s a simple matter of swapping parts.
I’m doing some simple modifications to the kit. First up, I added plastic strips at the base of the torso to extend its height by 1.5mm.
I also added some plastic strips inside the torso to extend the neck by about 1.5mm.
I think I’ll swap out the GM Quel thrusters and use a different weapon too.