Tag: TNI-AU

On the Bench

WIP : Revell 1/72 MiG-21F-13 ‘AURI’ Pt.4 – Painting & Finishing

Once the main painting is done I picked out the details like the exhaust and gun port. Then a gloss coat with AK Gauzy is done to get ready for decals. Markings will come from Scale Nutz. This is a long out of production sheet from almost two decades ago. Let’s see how it holds …...

Read More

On the Bench

WIP : Revell 1/72 MiG-21F-13 ‘AURI’ Pt.3 – Painting & Finishing

After masking the canopy, I carefully cemented it into place with the help of some pressure to get it to fit with minimal gaps. The canopy frame needs pre-painting but I wasn’t sure what’s the correct color so I just went with the tried and true black. The MiG I’m modeling has a red shock …...

Read More

On the Bench

WIP : Revell 1/72 MiG-21F-13 ‘AURI’ Pt.2 – Construction

Once general assembly is done it’s time to deal with the nose profile. To my eye, the angle of the slope on the kit is just that minorly too sharp. First though I have to deal with the shock cone which is molded with 4 attachment arms. This is wrong as it should only arms …...

Read More

On the Bench

WIP : Revell 1/72 MiG-21F-13 ‘AURI’ Pt.1 – Construction

For my next Indonesian Air Force build, I’m tackling the MiG-21F-13 that served the AURI in the early 1960s. Revell kits can be quite hit or miss, how will this one fare? A quick dryfit shows decent fit. The details are very finely done but the leading edge of the wing root gap is quite …...

Read More

My Builds

Completed : Hasegawa 1/72 Lockheed Martin F-16A Fighting Falcon ‘Tentara Nasional Indonesia – Angkatan Udara (TNI-AU)’

Kit InfoBrand: 1/72 Hasegawa 00188Media: StyreneMarkings: Kit and Zotz Decals 72-016 ‘Vivacious Vipers #2’ The SubjectThe Lockheed Martin (originally General Dynamics) F-16 Fighting Falcon is a multirole jet fighter. With over 4,400 aircraft built, it currently serves in 25 nations. Commonly known as the ‘Viper’, it...

Read More

On the Bench

WIP : Hasegawa 1/72 F-16A ‘TNI-AU’ Pt. 3 – Painting & Finishing

So in the last post I’d taken off the masking of the walkways and was checking my work and I felt that there was something wrong… At 0.7mm the walkways were too thick. They need to be thinner. So out with the masking tape again and I carefully painted the colors of the scheme over …...

Read More

On the Bench

WIP : Hasegawa 1/72 F-16A ‘TNI-AU’ Pt. 2 – Painting & Finishing

The fun part can now begin. The original TNI F-16As were delivered in a very striking three tone scheme and the few photos found online showed that it was medium blue, light and medium gray colors. However I was told by a good friend that the light gray was actually a light blue. He sent …...

Read More

On the Bench

WIP : Hasegawa 1/72 F-16A ‘TNI-AU’ Pt. 1 – Construction

It’s August again and time for my annual TNI-AU (Indonesian Air Force) build to coincide with Indonesia’s independence day on 17 August 1945. This time it’s the Lockheed Martin (then General Dynamics) F-16A Fighting Falcon (or Viper) Block 15 OCU delivered to Indonesia in 1989. i’ve had this boxing of the...

Read More

My Builds

Completed : Trumpeter 1/72 Sukhoi Su-30MK2 Flanker-G ‘TNI-AU’

Kit Info Brand: Trumpeter 01659 Scale: 1/72 Media: Styrene Markings: Caracal Models CD72041 The Subject The Sukhoi Su-30MKK (Russian: Сухой Су-30; NATO reporting name: Flanker-G) is a variant of the Su-30 (NATO reporting name: Flanker-C). The Su-30 is a twin-engine, two-seat fighter aircraft developed in the Soviet Union by...

Read More

On the Bench

WIP : Trumpeter 1/72 Su-30MK2 TNI-AU Pt. 5 – Finishing

Time to finish this build even though I didn’t make the 17 August deadline. Finishing took more time as usual because of various unforeseen disasters that needed to be addressed. Anyway, the decals I’m using comes from Caracal Models. They were printed by Cartograf so quality looks very good. Over the usual gloss coat, the...

Read More
Close