Tag: WIP : 1/48 F-104J

On the Bench

WIP : Hasegawa 1/48 F-104J Starfighter Pt. 6 – Finishing

Once fully cured and wiped down, I sprayed another layer of gloss to prep for a panel wash. This time I decided to do it with Vallejo Dark Grey Model Wash instead of the usual Mig AMMO panel wash. I figured this one will give a subtler effect. I haven’t used it in a while …...

Read More

On the Bench

WIP : Hasegawa 1/48 F-104J Starfighter Pt. 5 – Finishing

I begin with a gloss coat. I use AK Interactive’s Intermediate Gauzy, thinned 1:1 with water. There’s a tendency for gloss or flat coats to change the tone of metal paints but I’m glad to say that it works well with metal paints. Markings will be from the TwoBobs ‘F-104J Komatsu Starfighters’ sheet. As usual...

Read More

On the Bench

WIP : Hasegawa 1/48 F-104J Starfighter Pt. 4 – Painting

Painting the bare metal finish is next. I’ve had good results from the Vallejo Metal Color line which are acrylics, a more exotic choice than the usual lacquers like Alclad. I begin by masking off the colored areas with masking tape and paper. First on is Metal Color Aluminium. The paint goes on easily when …...

Read More

On the Bench

WIP : Hasegawa 1/48 F-104J Starfighter Pt. 3 – Painting

Painting begins with a black base with Tamiya XF-1 Black. The F-104J I’m modeling is a unit from the 202nd Hikotai, 5th Kokuden out of Nyutabaru Air Base in 1979. It sported a custom scheme over its all metal finish when it flew as an aggressor. So out come Tamiya XF-2 Flat White for the …...

Read More

On the Bench

WIP : Hasegawa 1/48 F-104J Starfighter Pt. 2 – Construction

Once properly painted, washed and weathered, the out of the box cockpit looks good. Fit in general is good. The instructions don’t call for it but I added some fishing weights in the nose just in case. The tip of the tail broke off during construction. This was fixed with plastic plates. As usual, some …...

Read More

On the Bench

WIP : Hasegawa 1/48 F-104J Starfighter Pt. 1 – Construction

Trying to get my building routine going again, I decided to tackle a 1/48 kit next. This will be an F-104J flown by the Japanese Air Self-Defense Force dressed in ‘Aggressor’ markings in the 1970s. I got this kit used from an online seller and it came with a set of aftermarket resin wheel bays …...

Read More
Close