It’s been a while heh. I always get bogged down in the sanding process but anyhow, finding some spare ball joints in my GM Quel resin kit spurred me to fix the one glaring problem with this project: the broken neck.
The original fix (August 30 entry) I did worked somewhat. The head would fit OK but it can’t tilt nor turn. With the ball joint, it would get back its mobility. For the head, I used a chisel to carefully and slowly scrape of plastic to make space for the female part of the ball joint. Then a healthy amount of super glue is used to fix it in place. Then I drilled a hole in the torso to fit the male part of the ball joint. It’s also fixed into place by super glue.
It has been raining almost everyday so the environment wasn’t condusive for painting. But it’s almost done! Except of course, more things to fix. Sigh. The pic on the right are some of them that require a final fixing before I can proceed. Bring on the sandpaper!
I try to build my kits with ease of painting in mind. So the more the parts that can be taken apart and painted separately the better. But alas, this being a HG kit, this is not possible so I have to settle with at least some masking, which is what I did below with the leg actuator parts.
This being the holiday period, I hope I have enough time to fix all of the problems and at least be ready for decaling by the new year. Heh. Wish…
I am finally onto the decal stages for this one. Although there are still some parts to fix, I decided to decal the ones that are all set.
I don’t really like to add too many decals to my kits. For one thing, it’s distracting to the overall lines of the kit, and for another, I’m a lazy bum who doesn’t like to deal with too many of them.
Because access to Gunze gloss coat is hard here, I decided to popby Ace Hardware to see whether there was an alternative. I found Krylon Preserve it! which was used for paper and photographs. Checking out the label, it says it would work for plastics so what the heck, I decided to try it.
And it actually works better than Gunze gloss! It’s cheaper too by the can! It dries into a very smooth and slippery glossy sheen which I couldn’t achieve with the Gunze-branded one. Nice.
Build Log
Part 1 | Part 2 | Part 3