WIP : Hasegawa 1/72 VF-25S Messiah Pt.2 – Painting
Looks patchy after a few rounds of gray to check for seamlines. But it’s finally ready to paint. First is the base of Tamiya XF-1 Flat Black cut with lacquer thinner. The VF-25S is in a 2 tone gray camo. I used MIG AMMO Light Gray for the lighter gray. I’m guessing because the mecha …...
Upcoming : Hasegawa Crusher Joe Fighter 1
It’s about time I say! Back in the 1980s I had the 1/144 Takara release and of course, I wrecked it by painting with Tamiya markers. Since this is from Hasegawa’s Creative Works line, it should be quite nicely detailed. Plus it’s in a nice 1/72 scale to boot. Can’t wait for the actual finished …...
WIP : Hasegawa 1/72 VF-25S Messiah Pt. 1 – Construction
Building up a Hasegawa Macross kit is easier than a typical aircraft kit in that they can be built up in subassemblies like a mecha kit. However, some planning is needed to make this work out so I begin by cutting and dryfitting the major parts together. As usual with Hasegawa, the fit is very …...
Completed : Airfix 1/72 BAE Systems Hawk 109 ‘TNI-AU’
Kit Info Brand: Airfix A03073 Scale: 1/72 Media: Styrene Markings: Scale Nutz A72019 1/72 TNI-AU Hawk 109/209 ‘Unity Guardian’ The Subject The British Aerospace Systems Hawk is a British single-engine, twin seat advanced trainer aircraft. It is used in a trainer capacity and as a low-cost combat aircraft. First flown in 1974,...
WIP : Airfix 1/72 Hawk 109 Pt. 3 – Finishing
Time to finish this thing. The markings come from Scale Nutz, a defunct decal company based in Singapore. The sheet comes with full stencils for 1 aircraft but enough unit numbers to build any of the Hawk 109 and 209s in TNI-AU service in either squadron. I went with TT-1203 from Skadron 12 for this …...
WIP : Airfix 1/72 Hawk 109 Pt. 2 – Painting
I used a gray color on the parts to check for gaps and thankfully, they weren’t too bad. Painting begins with Tamiya XF-1 Flat Black. First on was freehanded AK Interactive Dark Tan. Based on photos, the camouflage demarcations are solid so I used Tamiya Tape for Curves for these. To prevent overspray, I backfilled …...
WIP : Airfix 1/72 Hawk 109 Pt. 1 – Construction
Next up is another aircraft flown by the TNI-AU and my first modern Airfix kit. As usual, I begin with the ejection seats. The kit comes with seated pilots so no seatbelt details are provided. I made these from 1mm masking tape. Cockpit details are decals and are the same for both cockpits. Oddly, the …...
Completed : Fine Molds 1/72 Koensayr BTL-A4 Y-wing Starfighter
Kit Info Brand and Kit Number: Fine Molds Media: Injection Plastic Markings: Custom The Subject The BTL-A4 Y-Wing Starfighter is a single-seat assault fighter-bomber. Heavily armed with laser cannons, ion cannons, proton torpedos and proton bombs, it was deployed by the Republic Navy during the Clone Wars and the Rebel Alliance during...
WIP : Fine Molds 1/72 Y-Wing Fighter Pt.2 – Painting & Finishing
Painting begins with my usual black base using Tamiya XF-1 Flat Black. I’m trying a different marble coat this time with patches of various colors. I wanted to see these would have effect on the main colors. The primary color for the Y-wing is thinned Game Color Dead White. The nice thing about priming in …...
WIP : Fine Molds 1/72 Y-Wing Fighter Pt.1 – Construction
Time for a more stress-free build in the shape of this Star Wars kit from the folks at Fine Molds. As usual with anything that looks like an aircraft, the cockpit is built first. It’s on the simple side but once the pilot is in place, most the things here can’t be seen. With some …...
