Completed : Academy 1/72 North American F-86F Sabre
Kit Info Brand: Academy Scale: 1/72 Media: Injection Plastic The Subject The North American F-86 Sabre is a single-seat swept wing transonic jet fighter aircraft. First entering service with the USAF in 1949, the F-86 was one of the best and most important fighter aircraft during the Korean War. Armed with 6 x 0.50 caliber …...
WIP : Academy 1/72 F-86F Sabre Pt. 2
Finally onto decaling stage and the Academy decals are… crap. They take a long time to detach from the backing, are quite fragile, and doesn’t really react to Mark Softer. Since I don’t have Mark Setter I resorted to Future to stick some errant decals onto the surface. There were quite a few tearings so …...
WIP : Academy 1/72 F-86F Sabre Pt. 1
While I struggle with bad fits on other builds, this particular bad fitting kit is finally up for painting. This 1/72 Academy F-86F will be my first ever BMF build. First up is base coating with gloss black. And since there’s no easy way to add a handle for easy er… handling, I decided to …...
Completed : Tamiya 1/72 Bell AH-1W SuperCobra
Kit Info Brand: Tamiya Scale: 1/72 Media: Injection Plastic The Subject The introduction of the UH-1 Iroquois during the Vietnam War also brought the concept of air cavalry into reality: troops being carried by fleets of UH-1s to fight the enemy at time and places of their own choosing. However, the UH-1s would prove to …...
WIP : Tamiya 1/72 SuperCobra Pt. 2
Majority of painting done though I’m still fixing the paintwork here and there by hand. Relatively trouble-free until I dropped it on my lap nose first and almost breaking off the nose gun. I had to carefully bend the 1 remaining barrel back straight and ran thin cement on the other two breakages....
WIP : Tamiya 1/72 SuperCobra Pt. 1
So after a few rounds of fixing seamlines, I thnk I’ll go ahead with the painting stage. It’s hardly flawless but I think I’ve gotten it as far as I’m willing to go. I cut the main rotor into 3 pieces after reading that Italeri (this is a Tamiya rebox) molded the blades on backwards. …...
Completed : Skunkmodels 1/72 General Atomics MQ-9 Reaper
Kit Info Brand: Skunkmodels Scale: 1/72 Media: Injection Plastic The Subject The General Atomics MQ-9 Reaper is an unmanned aerial vehicle (UAV) capable of both remote and autonomous flight operations. It was developed by General Atomics Aeronautical Systems for the USAF and is a larger, heavier and more capable UAV than the General...
WIP : 1/72 Skunkmodels Reaper Pt. 2
Yeah it took a while but I’m almost done with this one. There has been quite a few minor disasters but none too serious luckily. I still have the antenna, weapons and navigation lights left to complete. Hopefully I can finish this by the end of the week....
Completed : Hasegawa 1/72 Stonewell Bellcom VF-1A Valkyrie
The Kit Brand: Hasegawa Scale: 1/72 Media: Injection Plastic The Subject First introduced in 2008, the VF-1 was developed for the UN Spacy using Overtechnology obtained from the Macross alien spaceship. It would remain as the mainstay fighter throughout what would be called Space War 1. The VF-1 is capable of space flight and is …...
WIP : 1/72 Hasegawa VF-1A Valkyrie Pt. 6
To fix the gloss issue, I decided to try out Lifecolor Gloss Clear instead. I thinned it with water (by guesstimate) and went ahead to spray 2-3 layers. It’s really a lot easier to use than Future. So much so that I’m considering just using Future for other things instead of glossing. So anyway then …...
