WIP : 1/72 Skunkmodels Reaper Pt. 1
I couldn’t resist starting on this when it arrived a few days ago. A pleasant surprise is the inclusion of 2 units of MQ-9s in the box, with 2 complete sets of decals too. A greater surprise is how big the MQ-9 actually is… It came together straightforward enough although the in order to get …...
WIP : 1/72 Hasegawa VF-1A Valkyrie Pt. 1
Kit Info Manufacturer: Hasegawa Scale: 1/72 Media: Injection Plastic Nothing new lately as I’ve been bogged down by the F-14 project: landing gear breaking, kit falling onto the table nose first and endless seamlines and gaps to fix. To distract me a bit, I’ve been plugging slowly on the Hasegawa 1/72 VF-1A kit on the...
Completed : Academy 1/72 Vought F-8E Crusader
Kit Info Manufacturer: Academy Scale: 1/72 Media: Injection Plastic The Subject The Vought F-8E Crusader was a single-engined, carrier-based air superiority jet aircraft which replaced the Vought F7U Cutlass in the US Navy and Marine Corps fleets. Known for its distinctive variable-incidence wing which pivoted by 7° out of the fuselage...
WIP : Hobbyboss 1/72 F-14B Tomcat Pt.1
The next project is a new kit instead of finishing a shelf queen. My friend said that this kit was quite straightforward compared to the Hasegawa. Let’s see shall we? First impressions are good so far. The panel lines aren’t as fine as Hasegawa’s but aren’t as deep as the Revell’s. Shape looks alright too....
WIP : 1/72 Academy F-8E Crusader Pt. 6
I spent some time fiddling with the canopy to get it to fit flush with the fuselage but it seems like the tolerance is very tight and the Future coat actually made the canopy thicker. I ended up resorting to some sanding and leaving out the back section of the canopy. And then it was …...
WIP : 1/72 Academy F-8E Crusader Pt. 5
I decided to give Lifecolor UA035 Flat Light Gull Gray a go and it turned out to be a more ‘correct’ shade of FS36440. Layering over the previous warmer shade of gray probably changed the color somewhat but it’s OK as long it looks more ‘right’ to my eyeball 1.0. Since the Crusader marking I’m …...
WIP : 1/72 Academy F-8E Crusader Pt. 4
After another round of fixing the seams and rescribing, I called it done and did a final primer coat to prep for painting. For this kit I used Vallejo White Primer instead of the usual Tamiya rattle can primer. It required multiple thin coats but at least it doesn’t smell as bad. As is the …...
WIP : 1/72 Academy F-8E Crusader Pt. 3
Work continues on this kit with fixing seamlines. This kit has a lot of panel lines and rivets that get obliterated due to sanding. I rescribed with a needle + pin vise combo using a strip of dymo tape as a guide. I choose to not redo the rivets just because :). It was also …...
Preview: 1/72 Hasegawa VF-25F/S Messiah
Kit Info Manufacturer: Hasegawa Scale: 1/72 Media: Injection Price: 2,720 JPY at Hobby Search The Subject The VF-25 Messiah is one of the latest variable fighters used by humans in 2059. It was developed as a replacement for the VF-171, the standard variable fighter in the New UN Spacy. Production prototypes were fielded by SMS …...
Preview: 1/72 Hasegawa ASF-X Shinden II
Kit Info Manufacturer: Hasegawa Scale: 1/72 Media: Injection Parts: 130 The Subject In 2008, Taiga Heavy Industries was commissioned by the Ministry of Defense to begin developing the ASF-X. By 2016, there were 4 prototypes built for testing: two each CTOL and STOVL variants. Unique to the Shinden II were the forward swept wings and...
