Tag: Cold War

On the Bench

WIP : Hasegawa 1/72 F-4J Phantom II Pt.1 – Construction

One of my oldest Shelf Queens, I started this kit in 2008 and had never finished it beyond the start of painting. I figured I should finally finish it up. My initial cockpit work from 2008. Belts were done with masking tape. The F-4J doesn’t have the arrowhead reinforcement plates on the stabilizers. These were …...

Read More

On the Bench

WIP : Trumpeter 1/72 F-100F Super Sabre Pt.1 – Construction

There has never been an official F-100F Wild Weasel I kitted so the only route is to modify a base 2-seater Super Sabre. Well, how hard can that be right? The base kit will be the Trumpeter F-100F kit from 2010. No photo of the box as I’d thrown the box away to save space …...

Read More

Previews

Preview : 1/72 F-4 Phantom II kit comparison (Fine Molds, Fujimi and Hasegawa)

The fine folks at Fine Molds have a reputation of superbly done kits and the latest kit in their quiver is the F-4 Phantom II, the first versions (the Japanese EJ and EJ Kai) of which were released in December 2019. With this new kit in my hands, I now have F-4 kits from four …...

Read More

My Builds

Completed : Fujimi 1/72 Douglas A-4F Skyhawk

Kit Info Brand: Fujimi F-24 Scale: 1/72 Media: Styrene Markings: Superscale 72-828 The Subject The Douglas (later McDonnell Douglas) A-4 Skyhawk is a single seat subsonic carrier-capable attack aircraft originally developed for the US Navy and US Marine Corps. While relatively lightweight, it was nimble, had a top speed of more than...

Read More

On the Bench

WIP : Fujimi 1/72 A-4F Skyhawk Pt. 2 – Construction, Painting & Finishing

Work continues with the smaller details that need to be addressed. First up is the mis-molded tailhook which eventually broke during my handling during construction. I cut off the tailhook bar and replaced it with 0.5mm plastic rod instead. I drilled a hole into the actuator side and inserted the rod to get a more …...

Read More

On the Bench

• 2 Comments

WIP : Fujimi 1/72 A-4F Skyhawk Pt. 1 – Construction

I’ve been wanting to build an A-4 Skyhawk armed for an Iron Hand (air defense suppression) mission for a while now and have heard good things about the Fujimi kit. Let’s see how it goes together shall we? The ejection seat has very fine belts molded on but I replaced them with 0.7mm masking tape …...

Read More

My Builds

Completed : Hasegawa 1/48 Lockheed/Mitsubishi F-104J Starfighter

Kit Info Brand: Hasegawa 09385 Scale: 1/48 Media: Injection Markings: TwoBobs 48-051 ‘F-104J Komatsu Starfighters’ The Subject The Lockheed F-104 Starfighter is a single-engine, supersonic interceptor aircraft developed for the USAF, but would serve the air forces of more than a dozen countries. It set many world speed records...

Read More

On the Bench

WIP : Hasegawa 1/48 F-104J Starfighter Pt. 6 – Finishing

Once fully cured and wiped down, I sprayed another layer of gloss to prep for a panel wash. This time I decided to do it with Vallejo Dark Grey Model Wash instead of the usual Mig AMMO panel wash. I figured this one will give a subtler effect. I haven’t used it in a while …...

Read More

On the Bench

WIP : Hasegawa 1/48 F-104J Starfighter Pt. 5 – Finishing

I begin with a gloss coat. I use AK Interactive’s Intermediate Gauzy, thinned 1:1 with water. There’s a tendency for gloss or flat coats to change the tone of metal paints but I’m glad to say that it works well with metal paints. Markings will be from the TwoBobs ‘F-104J Komatsu Starfighters’ sheet. As usual...

Read More

On the Bench

WIP : Hasegawa 1/48 F-104J Starfighter Pt. 4 – Painting

Painting the bare metal finish is next. I’ve had good results from the Vallejo Metal Color line which are acrylics, a more exotic choice than the usual lacquers like Alclad. I begin by masking off the colored areas with masking tape and paper. First on is Metal Color Aluminium. The paint goes on easily when …...

Read More
Close