WIP : 1/72 Hasegawa VF-1A Valkyrie Pt. 1
Kit Info Manufacturer: Hasegawa Scale: 1/72 Media: Injection Plastic Nothing new lately as I’ve been bogged down by the F-14 project: landing gear breaking, kit falling onto the table nose first and endless seamlines and gaps to fix. To distract me a bit, I’ve been plugging slowly on the Hasegawa 1/72 VF-1A kit on the...
WIP : Guncannon complete!
Took me longer than I would have liked but I’m finally done with this one. As usual, it’s not perfect, but I like how it turned out. Gallery up soon....
WIP : Hobbyboss 1/72 F-14B Tomcat Pt.1
The next project is a new kit instead of finishing a shelf queen. My friend said that this kit was quite straightforward compared to the Hasegawa. Let’s see shall we? First impressions are good so far. The panel lines aren’t as fine as Hasegawa’s but aren’t as deep as the Revell’s. Shape looks alright too....
WIP : 1/72 Academy F-8E Crusader Pt. 6
I spent some time fiddling with the canopy to get it to fit flush with the fuselage but it seems like the tolerance is very tight and the Future coat actually made the canopy thicker. I ended up resorting to some sanding and leaving out the back section of the canopy. And then it was …...
WIP : 1/72 Academy F-8E Crusader Pt. 5
I decided to give Lifecolor UA035 Flat Light Gull Gray a go and it turned out to be a more ‘correct’ shade of FS36440. Layering over the previous warmer shade of gray probably changed the color somewhat but it’s OK as long it looks more ‘right’ to my eyeball 1.0. Since the Crusader marking I’m …...
WIP : 1/72 Academy F-8E Crusader Pt. 4
After another round of fixing the seams and rescribing, I called it done and did a final primer coat to prep for painting. For this kit I used Vallejo White Primer instead of the usual Tamiya rattle can primer. It required multiple thin coats but at least it doesn’t smell as bad. As is the …...
WIP : 1/72 Academy F-8E Crusader Pt. 3
Work continues on this kit with fixing seamlines. This kit has a lot of panel lines and rivets that get obliterated due to sanding. I rescribed with a needle + pin vise combo using a strip of dymo tape as a guide. I choose to not redo the rivets just because :). It was also …...
WIP : Supermarine Spitfire Mk. Vb Pt. 4
I have found that Future is a lot easier to airbrush when thinned. It was however, slow going as I let the Future cure for a day between layers. In the end though, I got a decent result out of it. Time for decals! In my decals stash were 3 remaining markings from the Eagle …...
WIP : Supermarine Spitfire Mk. Vb Pt. 3
Now it’s time to cleanup the camo. First up, I painted all the gaps that I missed out the first time round. I also took the opportunity to finetune the camo by using blutack on specific spots. Sometimes the camera sensor catches more than the eye can see. This close-up pic clearly shows a very …...
WIP : Supermarine Spitfire Mk. Vb Pt. 2
Painting begins. The Spitfire I’m modeling is primarily 3 colors: Medium sea grey bottom with ocean grey and dark green up top. First up, the bottom. Based on some research, Model Master Acryl Neutral Gray 4757 is a close match to medium sea grey. As acrylic paint chip easily, I let each color cure at …...
